23 lines
1.6 KiB
JSON
23 lines
1.6 KiB
JSON
{
|
||
"manufacturer": "Vivint",
|
||
"manufacturerId": "0x0156",
|
||
"label": "CP04",
|
||
"description": "Vivint Smart Hub",
|
||
"devices": [
|
||
{
|
||
"productType": "0x0001",
|
||
"productId": "0x0002",
|
||
"zwaveAllianceId": 3113
|
||
}
|
||
],
|
||
"firmwareVersion": {
|
||
"min": "0.0",
|
||
"max": "255.255"
|
||
},
|
||
"metadata": {
|
||
"inclusion": "To add a Z-Wave device to the panel network — as with all sensors and peripheral devices — follow the detailed installation instructions included with that particular device.\n\nTo access Z-Wave settings from the control panel, go to:\n\nMenu > Software Version > Installer Toolbox > Smart Home Devices > Z-Wave",
|
||
"exclusion": "To remove a Z-Wave device to the panel network — as with all sensors and peripheral devices — follow the detailed installation instructions included with that particular device.\n\nTo access Z-Wave settings from the control panel, go to:\n\nMenu > Software Version > Installer Toolbox > Smart Home Devices > Z-Wave",
|
||
"reset": "The SmartHub’s Z-Wave network can be reset to a default state, removing all Z-Wave devices in the process. Please use this procedure only when the network primary controller is missing or otherwise inoperable. To do this, follow these instructions from the settings tab:\n5.2\n1. 2. 3. 4. 5. 6.\nOn the “Support” page, touch “Software version” Enter the default installer PIN code (2203)\nSelect “Smart Home devices”\nSelect “Z-Wave”\nSelect “Reset controller”\nFollow the on-screen instructions to complete the operation",
|
||
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3113/SmartHubZwaveManual%20181025.pdf"
|
||
}
|
||
}
|