{
	"manufacturer": "Vivint",
	"manufacturerId": "0x0156",
	"label": "CP04",
	"description": "Vivint Smart Hub",
	"devices": [
		{
			"productType": "0x0001",
			"productId": "0x0002",
			"zwaveAllianceId": 3113
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "To add a Z-Wave device to the panel network — as with all sensors and peripheral devices — follow the detailed installation instructions included with that particular device.\n\nTo access Z-Wave settings from the control panel, go to:\n\nMenu > Software Version > Installer Toolbox > Smart Home Devices > Z-Wave",
		"exclusion": "To remove a Z-Wave device to the panel network — as with all sensors and peripheral devices — follow the detailed installation instructions included with that particular device.\n\nTo access Z-Wave settings from the control panel, go to:\n\nMenu > Software Version > Installer Toolbox > Smart Home Devices > Z-Wave",
		"reset": "The SmartHub’s Z-Wave network can be reset to a default state, removing all Z-Wave devices in the process. Please use this procedure only when the network primary controller is missing or otherwise inoperable. To do this, follow these instructions from the settings tab:\n5.2\n1. 2. 3. 4. 5. 6.\nOn the “Support” page, touch “Software version” Enter the default installer PIN code (2203)\nSelect “Smart Home devices”\nSelect “Z-Wave”\nSelect “Reset controller”\nFollow the on-screen instructions to complete the operation",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3113/SmartHubZwaveManual%20181025.pdf"
	}
}