zwave-js/.config-db/devices/0x0109/zl7435-5.json
2025-01-10 22:05:04 -08:00

43 lines
1.9 KiB
JSON

{
"manufacturer": "Vision Security",
"manufacturerId": "0x0109",
"label": "ZL7435-5",
"description": "In-Wall Two Relay",
"devices": [
{
"productType": "0x2017",
"productId": "0x1719",
"zwaveAllianceId": 1367
}
],
"firmwareVersion": {
"min": "0.0",
"max": "255.255"
},
"paramInformation": [
{
"#": "1",
"label": "Button Mode Switching",
"description": "This parameter sets the mode for the wall switch inputs",
"valueSize": 1,
"defaultValue": 0,
"allowManualEntry": false,
"options": [
{
"label": "Switch mode",
"value": 0
},
{
"label": "Toggle mode",
"value": 1
}
]
}
],
"metadata": {
"inclusion": "For “Inclusion” in (adding to) a network: Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZL 7435EU-5 to your controller. To get in the “inclusion” mode, the distance between module and controller is suggested to be in one meter. \nPress 3 times within 2 seconds or turn on the wall switch 3 times within 2 seconds (or press toggle switch 3 times) to be included.",
"exclusion": "For “Exclusion” from (removing from) a network: Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the ZL 7435EU-5 from your controller. Press 3 times within 2 seconds or turn on the wall switch 3 times within 2 seconds (or press toggle switch 3 times) to be excluded.",
"reset": "Factory Default Reset: Power off first, press Program Switch and power on till 10 seconds, ZL7435EU-5 will send the “Device Reset Locally Notification” command and reset to the factory default. (Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.)",
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1367/ZL7435-5%20In-Wall%20Switch%20-%202%20Relays_20141205.pdf"
}
}