23 lines
1.2 KiB
JSON
23 lines
1.2 KiB
JSON
{
|
|
"manufacturer": "2KLIC",
|
|
"manufacturerId": "0x0369",
|
|
"label": "7440-MC-FS",
|
|
"description": "Connectair Module",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0100",
|
|
"productId": "0x0101",
|
|
"zwaveAllianceId": 2965
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"metadata": {
|
|
"inclusion": "Start the adding process on the controller side\n\nOnce started, start the adding process on the Connectair module by pressing 3 times the Z-Wave button, located between the plus and the minus button, using the included tool.\n\nWhen added, the LED will turn off",
|
|
"exclusion": "Start the removing process on the controller side\nOnce started, put the device in \"learn mode\" by pressing 3 times on the Z-Wave button, located between the plus and the minus button, using the included tool.\nWhen removed, the LED will turn on",
|
|
"reset": "Please use this procedure only when the network primary controller is missing or otherwise inoperable\n\nHold the Z-Wave button for about ten seconds\nIf it was included, the LED will turn back on when reset is done",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2965/ICCVUG-120618-2329.pdf"
|
|
}
|
|
}
|