23 lines
1.4 KiB
JSON
23 lines
1.4 KiB
JSON
{
|
|
"manufacturer": "KOCOM",
|
|
"manufacturerId": "0x034c",
|
|
"label": "KAS-Z10",
|
|
"description": "PIR Sensor",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0003",
|
|
"productId": "0x0001",
|
|
"zwaveAllianceId": 2756
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"metadata": {
|
|
"inclusion": " Press & hold inclusion/Exclusion button during 1 seconds when Open Sensor is exclusion status \n\n Press for 1seconds, LED is turn on \n\n Open sensor will try inclusion for 15 seconds when button is released.\n\n If inclusion is successful, LED will blink 3 times with 100ms interval",
|
|
"exclusion": " Press & hold inclusion/Exclusion button during 1 seconds when Open Sensor is exclusion status \n\n Press for 1seconds, LED is turn on \n\n Open sensor will try exclusion when button is released. \n\n If exclusion is successful, LED will blink 3 times with 100ms interval",
|
|
"reset": " Press & hold inclusion/Exclusion button during 5 seconds. \n\n LED turn on and LED turn off after 5sec \n\n Release Inclusion/Exclusion \n\n Factory reset will be done in 5 seconds and blink 5 times with 100ms interval \n\n※ Please use factory reset only when the network primary controller is missing or otherwise inoperable",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2756/51226_KAS-Z10.pdf"
|
|
}
|
|
}
|