{
	"manufacturer": "KOCOM",
	"manufacturerId": "0x034c",
	"label": "KAS-Z10",
	"description": "PIR Sensor",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0001",
			"zwaveAllianceId": 2756
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": " Press & hold inclusion/Exclusion button during 1 seconds when Open Sensor is exclusion status \n\n Press for 1seconds, LED is turn on \n\n Open sensor will try inclusion for 15 seconds when button is released.\n\n If inclusion is successful, LED will blink 3 times with 100ms interval",
		"exclusion": " Press & hold inclusion/Exclusion button during 1 seconds when Open Sensor is exclusion status \n\n Press for 1seconds, LED is turn on \n\n Open sensor will try exclusion when button is released. \n\n If exclusion is successful, LED will blink 3 times with 100ms interval",
		"reset": " Press & hold inclusion/Exclusion button during 5 seconds. \n\n LED turn on and LED turn off after 5sec \n\n Release Inclusion/Exclusion \n\n Factory reset will be done in 5 seconds and blink 5 times with 100ms interval \n\n※ Please use factory reset only when the network primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2756/51226_KAS-Z10.pdf"
	}
}