38 lines
1.6 KiB
JSON
38 lines
1.6 KiB
JSON
{
|
|
"manufacturer": "Heatit",
|
|
"manufacturerId": "0x019b",
|
|
"label": "Z-Smoke Battery",
|
|
"description": "Wireless Smoke Detector",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0003",
|
|
"productId": "0x3602",
|
|
"zwaveAllianceId": 4064
|
|
},
|
|
{
|
|
"productType": "0x0003",
|
|
"productId": "0x0018"
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"associations": {
|
|
"1": {
|
|
"label": "Lifeline",
|
|
"maxNodes": 1,
|
|
"isLifeline": true
|
|
},
|
|
"2": {
|
|
"label": "Smoke Sensor (Basic Set)",
|
|
"maxNodes": 5
|
|
}
|
|
},
|
|
"metadata": {
|
|
"inclusion": "1. Put the Z-Wave gateway or control panel into Inclusion or Learning mode (please refer to the Z-Wave gateway or control panel manual).\n2. Within 1.5 seconds, press the Function button 3 times. The Smoke Detector will emit a 2-tone beep and the LED will turn on for ~2 seconds. Refer to the operation manual of the Z-Wave gateway or control panel to complete the learn-in process.",
|
|
"exclusion": "1. Put the Z-Wave gateway or control panel into Exclusion mode (please refer to the Z-Wave gateway or control panel manual).\n2. Within 1.5 seconds, press the Function button 3 times and the Smoke Detector will be removed from the Z-Wave network.",
|
|
"reset": "(Only use factory reset when network Control Panel/Gateway is missing or inoperable).\nPress and hold the button of the smoke detector for 20 seconds. Release the button when you hear 3 beeps to perform factory reset.",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4064/Heatit%20Z-Smoke%20Battery%2020201214.pdf"
|
|
}
|
|
}
|