{
	"manufacturer": "Heatit",
	"manufacturerId": "0x019b",
	"label": "Z-Smoke Battery",
	"description": "Wireless Smoke Detector",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x3602",
			"zwaveAllianceId": 4064
		},
		{
			"productType": "0x0003",
			"productId": "0x0018"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 1,
			"isLifeline": true
		},
		"2": {
			"label": "Smoke Sensor (Basic Set)",
			"maxNodes": 5
		}
	},
	"metadata": {
		"inclusion": "1. Put the Z-Wave gateway or control panel into Inclusion or Learning mode (please refer to the Z-Wave gateway or control panel manual).\n2. Within 1.5 seconds, press the Function button 3 times. The Smoke Detector will emit a 2-tone beep and the LED will turn on for ~2 seconds. Refer to the operation manual of the Z-Wave gateway or control panel to complete the learn-in process.",
		"exclusion": "1. Put the Z-Wave gateway or control panel into Exclusion mode (please refer to the Z-Wave gateway or control panel manual).\n2. Within 1.5 seconds, press the Function button 3 times and the Smoke Detector will be removed from the Z-Wave network.",
		"reset": "(Only use factory reset when network Control Panel/Gateway is missing or inoperable).\nPress and hold the button of the smoke detector for 20 seconds. Release the button when you hear 3 beeps to perform factory reset.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4064/Heatit%20Z-Smoke%20Battery%2020201214.pdf"
	}
}