23 lines
1.5 KiB
JSON
23 lines
1.5 KiB
JSON
{
|
|
"manufacturer": "Somfy",
|
|
"manufacturerId": "0x0047",
|
|
"label": "Z2RTSEU-5",
|
|
"description": "Z-WAVE2RTS Interface",
|
|
"devices": [
|
|
{
|
|
"productType": "0x3001",
|
|
"productId": "0x0b01",
|
|
"zwaveAllianceId": [1913, 2760]
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"metadata": {
|
|
"inclusion": "Inclusion:\n1. Enable the Z-Wave HUB into the Inclusion mode.\n2. Short press the Z-Wave PROG button for 3 times. ZWave2RTS interface will be included in the Z-Wave network automatically.\n3. The Z-WAVE LED turns OFF indicating that the Z-Wave2RTS interface has successfully joined the Z-Wave network",
|
|
"exclusion": "Exclusion:\n1. Power ON the Z-Wave2RTS interface.\n2. Enable the Z-Wave HUB into exclusion mode.\n3. Short press the Z-Wave PROG button for 3 times.\n4. The Z-WAVE LED flashes indicating that the Z-Wave2RTS interface has successfully been removed from the Z-Wave network",
|
|
"reset": "Reset the Z-Wave module to factory mode:\n1. Power OFF the Z-Wave2RTS interface.\n2. Press and hold the Z-Wave PROG button.\n3. Power ON the Z-Wave2RTS interface and wait for 10 seconds.\n4. The Z-Wave LED flashes indicating that the data is cleared and it is open to join Z-Wave network.\n\nRemark: Please use this procedure only in the event that your network primary controller is missing or otherwise inoperable!!!",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2760/Product%20user%20manual%20AU%20version%20v1.1.pdf"
|
|
}
|
|
}
|