42 lines
1.4 KiB
JSON
42 lines
1.4 KiB
JSON
|
{
|
||
|
|
"manufacturer": "Ningbo Sentek Electronics Co., Ltd.",
|
||
|
|
"manufacturerId": "0x0185",
|
||
|
|
"label": "ZM-800",
|
||
|
|
"description": "PIR Motion Sensor",
|
||
|
|
"devices": [
|
||
|
|
{
|
||
|
|
"productType": "0x0003",
|
||
|
|
"productId": "0x0009",
|
||
|
|
"zwaveAllianceId": [1733, 1803]
|
||
|
|
}
|
||
|
|
],
|
||
|
|
"firmwareVersion": {
|
||
|
|
"min": "0.0",
|
||
|
|
"max": "255.255"
|
||
|
|
},
|
||
|
|
"paramInformation": [
|
||
|
|
{
|
||
|
|
"#": "1",
|
||
|
|
"label": "LED Light",
|
||
|
|
"valueSize": 1,
|
||
|
|
"defaultValue": 1,
|
||
|
|
"allowManualEntry": false,
|
||
|
|
"options": [
|
||
|
|
{
|
||
|
|
"label": "Disable",
|
||
|
|
"value": 0
|
||
|
|
},
|
||
|
|
{
|
||
|
|
"label": "Enable",
|
||
|
|
"value": 1
|
||
|
|
}
|
||
|
|
]
|
||
|
|
}
|
||
|
|
],
|
||
|
|
"metadata": {
|
||
|
|
"inclusion": "1. Make sure ZM-800 is in the range of the Z-Wave controller. \n2. Set the Z-Wave controller to the inclusion mode. \n3. Quickly pressing TP-Switch2 button 3 times on the ZM-800.\n4. The ZM-800 is added to the network",
|
||
|
|
"exclusion": "1. Make sure ZM-800 is in the range of the Z-Wave controller. \n2. Set the Z-Wave controller to the exclusion mode. \n3. Quickly pressing TP-Switch2 button 3 times on the ZM-800.\n4. The ZM-800 is deleted from the network",
|
||
|
|
"reset": "Note: Use the reset procedure only in the event that the network primary controller is missing or otherwise inoperable.\n1. Press the TP-Switch2 button more than 5 seconds. \n2. Z-Wave LED is start blinking.\n3. Release the TP-Switch2 button right now.\n4. Z-Wave LED off, reset is performed"
|
||
|
|
}
|
||
|
|
}
|