48 lines
2 KiB
JSON
48 lines
2 KiB
JSON
|
{
|
||
|
|
"manufacturer": "SATCO Products, Inc.",
|
||
|
|
"manufacturerId": "0x0307",
|
||
|
|
"label": "86-100",
|
||
|
|
"description": "Z-Wave Plug-In On/Off Appliance Module",
|
||
|
|
"devices": [
|
||
|
|
{
|
||
|
|
"productType": "0x4447",
|
||
|
|
"productId": "0x3031",
|
||
|
|
"zwaveAllianceId": 2042
|
||
|
|
}
|
||
|
|
],
|
||
|
|
"firmwareVersion": {
|
||
|
|
"min": "0.0",
|
||
|
|
"max": "255.255"
|
||
|
|
},
|
||
|
|
"paramInformation": [
|
||
|
|
{
|
||
|
|
"#": "3",
|
||
|
|
"label": "LED Indicator",
|
||
|
|
"description": "The LED indicator will be on whenever the connected appliance is off, and turns off when the connected device is on",
|
||
|
|
"valueSize": 1,
|
||
|
|
"defaultValue": 0,
|
||
|
|
"allowManualEntry": false,
|
||
|
|
"options": [
|
||
|
|
{
|
||
|
|
"label": "LED on when load is on",
|
||
|
|
"value": 0
|
||
|
|
},
|
||
|
|
{
|
||
|
|
"label": "LED on when load is off",
|
||
|
|
"value": 1
|
||
|
|
},
|
||
|
|
{
|
||
|
|
"label": "Always off",
|
||
|
|
"value": 2
|
||
|
|
}
|
||
|
|
]
|
||
|
|
}
|
||
|
|
],
|
||
|
|
"metadata": {
|
||
|
|
"inclusion": "1. Put your network controller into inclusion mode following the instructions from your controller manufacturer\n2. When the controller is ready, single click the button on the front of 86-100 \n3. The controller should indicate that the new device was added successfully",
|
||
|
|
"exclusion": "1. Put your network controller into exclusion mode following the instructions from your controller manufacturer\n2. When the controller is ready, single click the button on the front of 86-100 \n3. The controller should indicate that the device was excluded successfully",
|
||
|
|
"reset": "Use this procedure only in the event that the network primary controller is lost or otherwise inoperable.\n\na. Unplug 86-100 from the AC outlet and also unplug the power plug of the appliance from the module(if plugged in)\nb. Press and hold the button on the 86-100 module\nc. Plug the 86-100 back into the AC outlet with the button pressed\nd. After 3 seconds, release the button. If you see the button blinks, that means the module has been reset successfully",
|
||
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2042/86-100%20IOT%20OM_102116.pdf"
|
||
|
|
}
|
||
|
|
}
|