24 lines
1.7 KiB
JSON
24 lines
1.7 KiB
JSON
|
{
|
||
|
|
"manufacturer": "Climax Technology, Ltd.",
|
||
|
|
"manufacturerId": "0x018e",
|
||
|
|
"label": "WLS-23-ZW",
|
||
|
|
"description": "Water Leakage Sensor",
|
||
|
|
"devices": [
|
||
|
|
{
|
||
|
|
"productType": "0x0003",
|
||
|
|
"productId": "0x0012",
|
||
|
|
"zwaveAllianceId": 3594
|
||
|
|
}
|
||
|
|
],
|
||
|
|
"firmwareVersion": {
|
||
|
|
"min": "0.0",
|
||
|
|
"max": "255.255"
|
||
|
|
},
|
||
|
|
"metadata": {
|
||
|
|
"inclusion": "1. Open the cover by removing the bottom fixing screw (using a Philips screwdriver) on the Water Leak Sensor. \n2. Insert the battery in the battery compartment \n3. Put the Z-Wave gateway or control panel into Inclusion mode (please refer to the Z-Wave gateway or control panel manual). \n4. Within 1.5 seconds, press the Function Button 3 times. \n5. Refer to the operation manual of the Z-Wave gateway or control panel to complete the adding process. \n6. If the sensor has already been added (included) into another Z-Wave Gateway/Control Panel, or if the sensor is unable to be learnt into the current Z-Wave Gateway/Control Panel, please exclude it first (see Removing Device) before attempting to include it into the current Z-Wave Gateway/Control Panel. \n7. Reattach the cover to the base and tighten the bottom-fixing screw.",
|
||
|
|
"exclusion": "1. Put the Z-Wave gateway or control panel into Exclusion mode (please refer to the Z-Wave gateway or control panel manual). \n2. Within 1.5 seconds, press the Function Button 3 times and the Water Leak Sensor will be removed from the Z-Wave network.",
|
||
|
|
"reset": "(Only use factory reset when network Control Panel/Gateway is missing or inoperable).\nPress and hold the Function Button of the Water Leak Sensor for 10 seconds to factory reset.",
|
||
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3594/WLS-23-ZW_20190612.pdf"
|
||
|
|
}
|
||
|
|
}
|