{
	"manufacturer": "Climax Technology, Ltd.",
	"manufacturerId": "0x018e",
	"label": "WLS-23-ZW",
	"description": "Water Leakage Sensor",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0012",
			"zwaveAllianceId": 3594
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "1. Open the cover by removing the bottom fixing screw (using a Philips screwdriver) on the Water Leak Sensor. \n2. Insert the battery in the battery compartment \n3. Put the Z-Wave gateway or control panel into Inclusion mode (please refer to the Z-Wave gateway or control panel manual). \n4. Within 1.5 seconds, press the Function Button 3 times. \n5. Refer to the operation manual of the Z-Wave gateway or control panel to complete the adding process. \n6. If the sensor has already been added (included) into another Z-Wave Gateway/Control Panel, or if the sensor is unable to be learnt into the current Z-Wave Gateway/Control Panel, please exclude it first (see Removing Device) before attempting to include it into the current Z-Wave Gateway/Control Panel. \n7. Reattach the cover to the base and tighten the bottom-fixing screw.",
		"exclusion": "1. Put the Z-Wave gateway or control panel into Exclusion mode (please refer to the Z-Wave gateway or control panel manual). \n2. Within 1.5 seconds, press the Function Button 3 times and the Water Leak Sensor will be removed from the Z-Wave network.",
		"reset": "(Only use factory reset when network Control Panel/Gateway is missing or inoperable).\nPress and hold the Function Button of the Water Leak Sensor for 10 seconds to factory reset.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3594/WLS-23-ZW_20190612.pdf"
	}
}