zwave-js/.config-db/devices/0x010f/fgrm222_0_24.23.json

{
	"manufacturer": "Fibargroup",
	"manufacturerId": "0x010f",
	"label": "FGRM222",
	"description": "Roller Shutter",
	"devices": [
		{
			"productType": "0x0301",
			"productId": "0x1001"
		},
		{
			"productType": "0x0301",
			"productId": "0x3001"
		},
		{
			"productType": "0x0302",
			"productId": "0x1000"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "24.23"
	},
	"associations": {
		"1": {
			"label": "Momentary click",
			"maxNodes": 16
		},
		"2": {
			"label": "Momentary hold",
			"description": "Only applies to momentary switches",
			"maxNodes": 16
		},
		"3": {
			"label": "Controller Updates",
			"maxNodes": 1,
			"isLifeline": true
		}
	},
	"proprietary": {
		"fibaroCCs": [38 /* 0x26 (Venetian Blinds) */]
	},
	"paramInformation": [
		{
			"#": "3",
			"label": "Reports Type",
			"description": "Enable Venetian Blind mode",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Blind position reports sent using Z-Wave commands",
					"value": 0
				},
				{
					"label": "Blind position reports sent using Fibaro commands",
					"value": 1
				}
			]
		},
		{
			"#": "10",
			"label": "Roller Shutter Operating Modes",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Roller blind mode, without positioning",
					"value": 0
				},
				{
					"label": "Roller blind mode, with positioning",
					"value": 1
				},
				{
					"label": "Venetian blind mode, with positioning",
					"value": 2
				},
				{
					"label": "Gate mode, without positioning",
					"value": 3
				},
				{
					"label": "Gate mode, with positioning",
					"value": 4
				}
			]
		},
		{
			"#": "12",
			"label": "Turning Time/delay Time",
			"description": "Time of full turn of the lamellas.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 150,
			"unsigned": true
		},
		{
			"#": "13",
			"label": "Lamellas Positioning Mode",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Only in case of the main controller operation",
					"value": 0
				},
				{
					"label": "Controller, switch or limit switch operation",
					"value": 1
				},
				{
					"label": "Controller, switch, limit sw operation/stop frame",
					"value": 2
				}
			]
		},
		{
			"#": "14",
			"label": "Switch Type",
			"description": "Parameter settings for Roller and Venetian Blind Mode",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Momentary switches",
					"value": 0
				},
				{
					"label": "Toggle switches",
					"value": 1
				},
				{
					"label": "Single, momentary switch",
					"value": 2
				}
			]
		},
		{
			"#": "17",
			"label": "Delay Time After S2",
			"description": "Relays turn off time after reaching a limit switch.",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 10,
			"unsigned": true
		},
		{
			"#": "18",
			"label": "Motor Operation Detection",
			"description": "Power threshold to be interpreted as reaching a limit switch.",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 255,
			"defaultValue": 10,
			"unsigned": true
		},
		{
			"#": "22",
			"label": "Motor Operation Time",
			"description": "Time period for the motor to continue operation.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 10,
			"unsigned": true
		},
		{
			"#": "29",
			"label": "Forced Roller Shutter Calibration",
			"description": "Roller Shutter enters the calibration mode.",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Deactivated",
					"value": 0
				},
				{
					"label": "Start calibration process",
					"value": 1
				}
			]
		},
		{
			"#": "30",
			"label": "Response to General Alarm",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No response to alarm frames",
					"value": 0
				},
				{
					"label": "Open blind",
					"value": 1
				},
				{
					"label": "Close blind",
					"value": 2
				}
			]
		},
		{
			"#": "31",
			"label": "Response to Water Flood Alarm",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No response to alarm frames",
					"value": 0
				},
				{
					"label": "Open blind",
					"value": 1
				},
				{
					"label": "Close blind",
					"value": 2
				}
			]
		},
		{
			"#": "32",
			"label": "Response to Smoke, CO, CO2 Alarm",
			"valueSize": 1,
			"defaultValue": 3,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No response to alarm frames",
					"value": 0
				},
				{
					"label": "Open blind",
					"value": 1
				},
				{
					"label": "Close blind",
					"value": 2
				}
			]
		},
		{
			"#": "33",
			"label": "Response to Temperature Alarm",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "No response to alarm frames",
					"value": 0
				},
				{
					"label": "Open blind",
					"value": 1
				},
				{
					"label": "Close blind",
					"value": 2
				}
			]
		},
		{
			"#": "35",
			"label": "Managing Lamellas in Response to Alarm",
			"description": "Lamellas reaction upon alarm detection.",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Do not change lamellas position",
					"value": 0
				},
				{
					"label": "Set lamellas to their extreme position",
					"value": 1
				}
			]
		},
		{
			"#": "40",
			"label": "Power Reports",
			"description": "Power level change resulting in new power value report",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 100,
			"defaultValue": 10
		},
		{
			"#": "42",
			"label": "Periodic Power or Energy Reports",
			"description": "Time to the next report. Value of 0 means the reports are turned off.",
			"valueSize": 2,
			"minValue": -32767,
			"maxValue": 32767,
			"defaultValue": 3600
		},
		{
			"#": "43",
			"label": "Energy Reports",
			"description": "Energy level change resulting in new energy value report",
			"valueSize": 1,
			"minValue": -126,
			"maxValue": 127,
			"defaultValue": 10
		},
		{
			"#": "44",
			"label": "Self-Measurement",
			"description": "Enables/disables power and energy report used by itself",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disabled",
					"value": 0
				},
				{
					"label": "Activated",
					"value": 1
				}
			]
		},
		{
			"#": "50",
			"label": "Scenes/Associations Activation",
			"description": "Determine whether scenes or associations are activated",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Associations active",
					"value": 0
				},
				{
					"label": "Scenes active",
					"value": 1
				}
			]
		}
	],
	"compat": {
		"commandClasses": {
			"add": {
				// The device can be controlled using Multilevel Switch CC, but it does not advertise it.
				"Multilevel Switch": {
					"isSupported": true,
					"version": 2
				}
			},
			// The device exposes Binary Switch CC, but Multilevel Switch CC supersedes it
			"remove": {
				"Binary Switch": {
					"endpoints": "*"
				}
			}
		}
	}
}