Add abcde config file

.abcde.conf

@@ -0,0 +1,93 @@
+# -----------------$HOME/.abcde.conf----------------- #
+# 
+# A sample configuration file to convert music cds to 
+#     m4a/aac using fdkaac and abcde version 2.9.3
+# 
+#       https://andrews-corner.org/abcde/
+# -------------------------------------------------- #
+
+# Encode tracks immediately after reading. Saves disk space, gives
+# better reading of 'scratchy' disks and better troubleshooting of
+# encoding process but slows the operation of abcde quite a bit:
+LOWDISK=y
+
+# Specify the method to use to retrieve the track information,
+# the alternative is to specify 'musicbrainz':
+CDDBMETHOD=musicbrainz
+
+# With the demise of freedb (thanks for the years of service!)
+# we move to an alternative:
+CDDBURL="http://gnudb.gnudb.org/~cddb/cddb.cgi"
+
+# Make a local cache of cddb entries and then volunteer to use 
+# these entries when and if they match the cd:
+CDDBCOPYLOCAL="y"
+CDDBLOCALDIR="$HOME/.cache/cddb"
+CDDBLOCALRECURSIVE="y"
+CDDBUSELOCAL="y"
+
+# Specify the encoder to use for m4a/aac. fdkaac is the
+# best choice under native Linux at the moment:
+AACENCODERSYNTAX=fdkaac
+
+# Specify the path to the selected encoder. In most cases the encoder
+# should be in your $PATH as I illustrate below, otherwise you will 
+# need to specify the full path. For example: /usr/bin/fdkaac
+FDKAAC=fdkaac
+
+# Specify your required encoding options here, the correct options
+# can be seen by running: 'fdkaac -h' in a Terminal. Some nice
+# examples of encoding options here: http://askubuntu.com/a/783890/57576
+FDKAACENCOPTS='-p 2 -m 5 -a 1'
+
+# Output type for m4a/aac.
+OUTPUTTYPE="m4a"
+
+# The cd ripping program to use. There are a few choices here: cdda2wav,
+# dagrab, cddafs (Mac OS X only) and flac. New to abcde 2.7 is 'libcdio'.
+CDROMREADERSYNTAX=cdparanoia            
+                                     
+# Give the location of the ripping program and pass any extra options,
+# if using libcdio set 'CD_PARANOIA=cd-paranoia'.
+CDPARANOIA=cdparanoia  
+CDPARANOIAOPTS="--never-skip=40"
+
+# Give the location of the CD identification program:       
+CDDISCID=cd-discid            
+                               
+# Give the base location here for the encoded music files.
+OUTPUTDIR="$HOME/Music"               
+
+# The default actions that abcde will take.
+ACTIONS=cddb,playlist,read,encode,tag,move,clean
+              
+# Decide here how you want the tracks labelled for a standard 'single-artist',
+# multi-track encode and also for a multi-track, 'various-artist' encode:
+OUTPUTFORMAT='${OUTPUT}/${ARTISTFILE}/${ALBUMFILE}/${TRACKNUM} ${TRACKFILE}'
+VAOUTPUTFORMAT='${OUTPUT}/Various Artists/${ALBUMFILE}/${TRACKNUM} ${ARTISTFILE}-${TRACKFILE}'
+
+# Decide here how you want the tracks labelled for a standard 'single-artist',
+# single-track encode and also for a single-track 'various-artist' encode.
+# (Create a single-track encode with 'abcde -1' from the commandline.)
+ONETRACKOUTPUTFORMAT='${OUTPUT}/${ARTISTFILE}/${ALBUMFILE}'
+VAONETRACKOUTPUTFORMAT='${OUTPUT}/Various Artists/${ALBUMFILE}'
+
+# Create playlists for single and various-artist encodes. I would suggest
+# commenting these out for single-track encoding.
+#PLAYLISTFORMAT='${OUTPUT}/${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}.m3u'
+#VAPLAYLISTFORMAT='${OUTPUT}/Various-${ALBUMFILE}/${ALBUMFILE}.m3u'
+
+# This function takes out dots preceding the album name, and removes a grab
+# bag of illegal characters. It allows spaces, if you do not wish spaces add
+# in -e 's/ /_/g' after the first sed command.
+mungefilename ()
+{
+  echo "$@" | sed -e 's/^\.*//' | tr -d ":><|*/\"'?[:cntrl:]"
+}
+
+# What extra options?
+MAXPROCS=2                              # Run a few encoders simultaneously
+PADTRACKS=y                             # Makes tracks 01 02 not 1 2
+EXTRAVERBOSE=2                          # Useful for debugging
+COMMENT='abcde version 2.9.3'           # Place a comment...
+EJECTCD=y                               # Please eject cd when finished :-) 

.config/nvim/lua/plugins/llm.lua

@@ -1,43 +1,86 @@
 return {
-	{
-		"github/copilot.vim",
-		config = function()
-			vim.keymap.set("n", "<leader>ce", ":Copilot enable<CR>", { desc = "Enable Copilot Completions" })
-			vim.keymap.set("n", "<leader>cd", ":Copilot disable<CR>", { desc = "Disable Copilot Completions" })
-			vim.keymap.set("i", "<C-a>", "copilot#Accept()", {
-				expr = true,
-				silent = true,
-				replace_keycodes = false,
-			})
-			vim.g.copilot_no_tab_map = true
-		end,
-	},
-	{
-		"CopilotC-Nvim/CopilotChat.nvim",
-		tag = "v3.4.0",
-		dependencies = {
-			{ "nvim-lua/plenary.nvim" },
-			{ "github/copilot.vim" },
-		},
-		build = "make tiktoken",
-		config = function()
-			vim.keymap.set("n", "<leader>cc", ":CopilotChatToggle<CR>", { desc = "Toggle Copilot Chat" })
-			vim.keymap.set("n", "<leader>cx", ":CopilotChatReset<CR>", { desc = "Reset Copilot Chat" })
-			require("CopilotChat").setup({
-				question_header = "",
-				answer_header = "",
-				separator = "",
-				error_header = "> [!ERROR] Error",
-				window = {
-					layout = "horizontal",
-					height = 0.3,
-					width = 0.25,
-				},
-				auto_insert_mode = false,
-				chat_autocomplete = false,
-				highlight_headers = false,
-				show_help = false,
-			})
-		end,
-	},
+  {
+    "github/copilot.vim",
+    config = function()
+      vim.keymap.set("n", "<leader>ce", ":Copilot enable<CR>", { desc = "Enable Copilot Completions" })
+      vim.keymap.set("n", "<leader>cd", ":Copilot disable<CR>", { desc = "Disable Copilot Completions" })
+      vim.keymap.set("i", "<C-a>", "copilot#Accept()", {
+        expr = true,
+        silent = true,
+        replace_keycodes = false,
+      })
+      vim.g.copilot_no_tab_map = true
+    end,
+  },
+  {
+    "CopilotC-Nvim/CopilotChat.nvim",
+    tag = "v3.4.0",
+    dependencies = {
+      { "nvim-lua/plenary.nvim" },
+      { "github/copilot.vim" },
+    },
+    build = "make tiktoken",
+    config = function()
+      -- vim.keymap.set("n", "<leader>cc", ":CopilotChatToggle<CR>", { desc = "Toggle Copilot Chat" })
+      -- vim.keymap.set("n", "<leader>cx", ":CopilotChatReset<CR>", { desc = "Reset Copilot Chat" })
+      require("CopilotChat").setup({
+        question_header = "",
+        answer_header = "",
+        separator = "",
+        error_header = "> [!ERROR] Error",
+        window = {
+          layout = "horizontal",
+          height = 0.3,
+          width = 0.25,
+        },
+        auto_insert_mode = false,
+        chat_autocomplete = false,
+        highlight_headers = false,
+        show_help = false,
+      })
+    end,
+  },
+  {
+    "olimorris/codecompanion.nvim",
+    dependencies = {
+      "nvim-lua/plenary.nvim",
+      "franco-ruggeri/codecompanion-spinner.nvim",
+    },
+    config = function()
+      vim.keymap.set("n", "<leader>cc", ":CodeCompanionChat Toggle<CR>", { desc = "Toggle CodeCompanion Chat" })
+      vim.keymap.set("v", "<leader>cc", ":CodeCompanionChat Add<CR>", { desc = "Add Context to CodeCompanion Chat" })
+      vim.keymap.set(
+        "n",
+        "<leader>cx",
+        ":CodeCompanion chat clear<CR>",
+        { desc = "Clear CodeCompanion Chat History" }
+      )
+
+      require("codecompanion").setup({
+        strategies = {
+          chat = {
+            adapter = "copilot",
+            model = "claude-3.5-sonnet",
+          },
+        },
+        extensions = {
+          spinner = {},
+        },
+        display = {
+          action_palette = {
+            width = 95,
+            height = 10,
+            prompt = "Prompt ", -- Prompt used for interactive LLM calls
+            provider = "default",
+            opts = {
+              show_default_actions = true, -- Show the default actions in the action palette?
+              show_default_prompt_library = true, -- Show the default prompt library in the action palette?
+              title = "CodeCompanion actions", -- The title of the action palette
+            },
+          },
+        },
+        log_level = "DEBUG",
+      })
+    end,
+  },
 }