25 lines
1.3 KiB
JSON
25 lines
1.3 KiB
JSON
{
|
|
"manufacturer": "Vesternet",
|
|
"manufacturerId": "0x0330",
|
|
"label": "VES-ZW-WAL-009",
|
|
"description": "Wall Controller - 8 Button",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0300",
|
|
"productId": "0xa305",
|
|
"zwaveAllianceId": 3334
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "1.27",
|
|
"max": "1.29"
|
|
},
|
|
// This device is a re-branded "Sunricher Wall Mounted Switch 8"
|
|
"preferred": true,
|
|
"metadata": {
|
|
"inclusion": "Step 1. Set primary controller/gateway into inclusion mode.\nStep 2. Press and hold down both | and O buttons on the top row for over 3 seconds until the LED indicator turns on. After approximately 10 seconds the LED indicator will blink 6 times to indicate successful inclusion.",
|
|
"exclusion": "Step 1. Set primary controller/gateway into exclusion mode.\nStep 2. Press and hold down both | and O buttons on the top row for over 3 seconds until the LED indicator turns on. After approximately 7 seconds the LED indicator will blink 4 times to indicate successful exclusion.",
|
|
"reset": "Press and hold down both | and O buttons on the top row for over 10 seconds until the LED indicator turns on. Release both | and O buttons and the LED indicator will blink 4 times to indicate successful factory reset.",
|
|
"manual": "https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZW-WAL-009.pdf"
|
|
}
|
|
}
|