34 lines
2.7 KiB
JSON
34 lines
2.7 KiB
JSON
{
|
|
"manufacturer": "ShenZhen Sunricher Technology, Ltd.",
|
|
"manufacturerId": "0x0330",
|
|
"label": "SR-ZV9001K2-DIM",
|
|
"description": "Z-Wave Dim Remote Control",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0300",
|
|
"productId": "0xa30f",
|
|
"zwaveAllianceId": 3900
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"paramInformation": [
|
|
{
|
|
"#": "1",
|
|
"label": "Factory Reset",
|
|
"valueSize": 2,
|
|
"minValue": 21930,
|
|
"maxValue": 21930,
|
|
"defaultValue": 21930,
|
|
"writeOnly": true
|
|
}
|
|
],
|
|
"metadata": {
|
|
"inclusion": "Step 1. Make sure the remote control does not belong to any Z-Wave network, short press any button, if LED indicator does not turn on, the remote control does not belong to any network, then continue step 2,if LED indicator turns on, it means the remote control has already been included to a network, please first set the remote control to exclusion mode (refer to the part \"Exclusion\" of this manual),then continue step 2.\nStep 2. Set primary controller/gateway into inclusion mode (Please refer to your primary controllers manual on how to turn your controller into inclusion).\nStep 3. Press and hold down both two buttons over 3 seconds, LED indicator turns on, the remote control will be set to inclusion mode, and waiting to be included, after 10s LED indicator blinks 6 times quickly to indicate successful inclusion. The remote control is a sleepy device, after inclusion it will not enter into sleepy mode immediately, and will continue activation status for 30s and wait data interaction from the gateway, the LED indicator will stay solid on, please be patient to wait LED indicator to turn off",
|
|
"exclusion": "There are two exclusion methods:\nMethod 1: Exclusion from the primary controller/gateway as follows:\n1. Set the primary controller/gateway into exclusion mode (Please refer to your primary controllers manual on how to set your controller into exclusion).\n2. Press and hold down both two buttons over 3 seconds, LED indicator turns on, the remote control will be set to exclusion mode, and waiting to be excluded, after 7s LED indicator blinks 4 times quickly to indicate successful exclusion.\nMethod 2: Factory reset the remote control will force the remote control to be excluded from a network. (please refer to the part “Factory Reset” of this manual)",
|
|
"reset": "Press and hold down both two buttons together for over 10 seconds, LED indicator turns on and then\nblinks 4 times quickly to indicate successful factory reset.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3900/SR-ZV9001K2-DIM%20Instruction.pdf"
|
|
}
|
|
}
|