23 lines
1.6 KiB
JSON
23 lines
1.6 KiB
JSON
{
|
||
"manufacturer": "Elexa Consumer Products Inc.",
|
||
"manufacturerId": "0x021f",
|
||
"label": "DMWV1",
|
||
"description": "Dome Water Main Shut Off",
|
||
"devices": [
|
||
{
|
||
"productType": "0x0003",
|
||
"productId": "0x0002",
|
||
"zwaveAllianceId": 2158
|
||
}
|
||
],
|
||
"firmwareVersion": {
|
||
"min": "0.0",
|
||
"max": "255.255"
|
||
},
|
||
"metadata": {
|
||
"inclusion": "1 For proper inclusion, bring the Water Main Shut-Off to the final location where it will be used. *\n2 Follow the instructions for your Z-Wave controller to enter inclusion mode.\n3 Make sure the Water Main Shut-Off is powered on, and when prompted by your controller, press the “open/close” button quickly 3 times in a row. The LED will stop blinking and stay on continuously upon successful inclusion.\n\n*For non Z-Wave Plus networks, please consult the owner’s manual for your primary controller to determine the best method and location for adding the Water Main Shut-Off to your Z-Wave network",
|
||
"exclusion": "1. Follow the instructions for your Z-Wave certified Controller to enter exclusion mode. \n2. When prompted, press the “open/close” button on the Shut-Off quickly 3 times in a row.",
|
||
"reset": "Press and hold the open/close button for at least 10 seconds then release. The Shut-Off’s memory will be erased to factory settings. A flashing light indicates a successful factory reset. Beware that resetting your device will disconnect it from your system. Only do this if the controller is missing or otherwise unreachable!",
|
||
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2158/Dome%20Water%20Main%20Shut-Off%20Advanced%20Manual.pdf"
|
||
}
|
||
}
|