23 lines
1.9 KiB
JSON
23 lines
1.9 KiB
JSON
{
|
|
"manufacturer": "Strattec Advanced Logic, LLC",
|
|
"manufacturerId": "0x0217",
|
|
"label": "9002",
|
|
"description": "Westinghouse RTS-PZ-AU",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0900",
|
|
"productId": "0x0002",
|
|
"zwaveAllianceId": 2167
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"metadata": {
|
|
"inclusion": "To include our device into a controller.\n1. Perform 'Include' on the controller.\n2. From the lock's main menu item \"7.Z-Wave\", select the \"Z-WaveInclusion\" by using the arrow keys to scroll to it and then pressing 'M' to select it. After a few second, you should see \"Success\" on the lock.",
|
|
"exclusion": "To exclude our device from a controller.\n1. Perform 'Exclude' on the controller.\n2. From the lock's main menu item \"7.Z-Wave\", select the \"Z-WaveExclusion\" by using the arrow keys to scroll to it and then pressing 'M' to select it. After a few second, you should see \"Success\" on the lock",
|
|
"reset": "If your controller fails or is replaced or if you need to perform a Factory Reset on the device so that an inclusion may be performed again or with a new controller, Factory reset can be done on the device by selecting 'Hard Reset' from the Main Menu on device's display and pressing the 'M' button. When prompted to reset press the 'M' button on the unit and the device will display initializing. Once the reset is complete the display will return to the Main Menu. Note: When a Hard Reset is completed, the Z-Wave node id is initialized to 0 and the device can't be controlled by Z-Wave. in order to control the device again, the controller needs to include the device on Z-Wave network. Please use this procedure only when the network primary controller is missing or otherwise inoperable",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2167/RTS_Manual_rev110216_Final.pdf"
|
|
}
|
|
}
|