23 lines
1.5 KiB
JSON
23 lines
1.5 KiB
JSON
{
|
|
"manufacturer": "Heatit",
|
|
"manufacturerId": "0x019b",
|
|
"label": "Z-Repeater",
|
|
"description": "Z-Wave Range Extender",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0003",
|
|
"productId": "0x3600",
|
|
"zwaveAllianceId": 3818
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"metadata": {
|
|
"inclusion": "1. Connect the Router into the power socket to power on. \n2. Put the Z-Wave Gateway or Control Panel into Inclusion mode (please refer to the Z-Wave Gateway or Control Panel manual).\n3. Within 1.5 seconds, press the Function Button 3 times.\n4. Refer to the operation manual of the Z-Wave Gateway or Control Panel to complete the adding process.\n5. If the sensor has already been added (included) into another Z-Wave Gateway/Control Panel, or if the sensor is unable to be added into the current Z-Wave Gateway/Control Panel, please exclude it first (see Removing Device) before attempting to include it into the current Z-Wave Gateway/Control Panel.",
|
|
"exclusion": "1. Put the Z-Wave Gateway or Control Panel into Exclusion mode (please refer to the Z-Wave Gateway or Control Panel manual).\n2. Within 1.5 seconds, press the Function Button 3 times and the Router will be removed from the Z-Wave network.",
|
|
"reset": "(Only use factory reset when network Control Panel/Gateway is missing or inoperable).\n*. Press and hold the Function Button for 10 seconds to factory reset.",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3818/Heatit%20Z-Repeater_20200305.pdf"
|
|
}
|
|
}
|