37 lines
2.3 KiB
JSON
37 lines
2.3 KiB
JSON
{
|
|
"manufacturer": "Climax Technology, Ltd.",
|
|
"manufacturerId": "0x018e",
|
|
"label": "SD-16ZW",
|
|
"description": "Smoke Detector",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0003",
|
|
"productId": "0x0004",
|
|
"zwaveAllianceId": 1621
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"associations": {
|
|
"1": {
|
|
"label": "Group 1",
|
|
"maxNodes": 1
|
|
},
|
|
"2": {
|
|
"label": "Group 2",
|
|
"maxNodes": 5
|
|
},
|
|
"3": {
|
|
"label": "Group 3",
|
|
"maxNodes": 5
|
|
}
|
|
},
|
|
"metadata": {
|
|
"inclusion": "This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufactures and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.\n-Put the Z-Wave gateway or control panel into Inclusion or Learning mode (please refer to the Z-Wave gateway or control panel manual).\n-Within 1.5 seconds, press the Function button 3 times. The Smoke Detector will emit a 2-tone beep and the LED will turn on for ~2 seconds.\n-Refer to the operation manual of the Z-Wave gateway or control panel to complete the learn-in process.\n-If the sensor has already been included (learnt) into another Z-Wave Gateway/Control Panel, or if the sensor is unable to be learnt into the current Z-Wave Gateway/Control Panel, please exclude it first (see Exclusion) before attempting to include it into the current Z-Wave Gateway/Control Panel.\n-When the 1-minute warming period is over, the Smoke Detector will start calibration process.",
|
|
"exclusion": "The Smoke Detector must be removed from existing Z-Wave network before being included into another. There are two methods available to exclude a device.\nExclusion Mode\n-Put the Z-Wave gateway or control panel into Exclusion mode (please refer to the Z-Wave gateway or control panel manual).\n-Within 1.5 seconds, press the Function button 3 times and the Smoke Detector will be removed from the Z-Wave network.",
|
|
"reset": "(Only use factory reset when network Control Panel/Gateway is missing or inoperable).\n-Press and hold the Function Button of the Smoke Detector for 10 seconds to factory reset",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1621/SD-16-ZW%2020160114.doc"
|
|
}
|
|
}
|