23 lines
2.5 KiB
JSON
23 lines
2.5 KiB
JSON
{
|
||
"manufacturer": "Climax Technology, Ltd.",
|
||
"manufacturerId": "0x018e",
|
||
"label": "BX-32ZW",
|
||
"description": "Outdoor Siren",
|
||
"devices": [
|
||
{
|
||
"productType": "0x0002",
|
||
"productId": "0x000b",
|
||
"zwaveAllianceId": 2156
|
||
}
|
||
],
|
||
"firmwareVersion": {
|
||
"min": "0.0",
|
||
"max": "255.255"
|
||
},
|
||
"metadata": {
|
||
"inclusion": "This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufactures and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.\n - Insert the two 1.5V D-Cell alkaline batteries into the battery \n compartment connecting the correct polarity as shown on the\n battery compartment lid.\n - The Bellbox will emit a 2-tone beep.\n Put the Z-Wave gateway or control panel into Inclusion mode (please \n refer to the Z-Wave gateway or control panel manual).\n - Within 1.5 seconds, press the Function Button 3 times.\n - Refer to the operation manual of the Z-Wave Gateway or Control \n Panel to complete the adding process.\n - If the sensor has already been added (included) into another Z-Wave \n Gateway/Control Panel, or if the sensor is unable to be added into \n the current Z-Wave Gateway/Control Panel, please exclude it first \n (see Removing Device) before attempting to include it into the \n current Z-Wave Gateway/Control Panel.",
|
||
"exclusion": "The Bellbox must be removed from existing Z-Wave network before being included into another. There are two methods available to exclude a device.\nExclusion Mode\n - Put the Z-Wave gateway or control panel into Exclusion mode \n (please refer to the Z-Wave gateway or control panel manual).\n - Within 1.5 seconds, press the Function Button 3 times and the \n Bellbox will be removed from the Z-Wave network.",
|
||
"reset": "Factory Reset\n(Only use factory reset when network Control Panel/Gateway is missing or inoperable).\n - Press and hold the Function button of the Bellbox for 10 seconds to \n factory reset with all LED flashes once.\n <NOTE>\n Factory resetting the Bellbox will restore it to factory default \n settings (excluded from the Z-Wave network). The Z-Wave gateway \n or control panel will still keep its Z-Wave settings. Please refer to \n the gateway or control panel manual on how to remove the \n Bellbox’s Z-Wave settings.",
|
||
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2156/BX-32ZW_20161229.docx"
|
||
}
|
||
}
|