23 lines
2.4 KiB
JSON
23 lines
2.4 KiB
JSON
{
|
|
"manufacturer": "Leak Intelligence, LLC",
|
|
"manufacturerId": "0x0173",
|
|
"label": "LGZW",
|
|
"description": "Water Valve Control",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0003",
|
|
"productId": "0x0002",
|
|
"zwaveAllianceId": 953
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"metadata": {
|
|
"inclusion": "How to Add the Leak Gopher Z-Wave Valve Control to your Z-Wave Controller\n- Plug the wall cube power adapter (included) into the receptacle on the bottom of the Leak Gopher Z-Wave Valve Control marked “3.6 VDC”. Plug the wall cube into a 110 VAC outlet. This provides power to the Leak Gopher Z-Wave Valve Control.\n- Configure the Z-Wave Controller to Add a device. \n- When the Z-Wave Controller is ready to add a device, it will display a message like “waiting to add device. Press Add button on the device”\n- The Add/Remove button is located on the side of the Leak Gopher Z-Wave Valve Control. Press the Add/Remove button.\n- The Z-Wave Controller will acknowledge that the Leak Gopher Z-Wave Valve Control had been added to the Z-Wave network.\n- Your Leak Gopher Z-Wave Valve Control is ready to use.",
|
|
"exclusion": "How to Remove the Leak Gopher Z-Wave Valve Control to your Z-Wave Controller\n\n- Plug the wall cube power adapter (included) into the receptacle on the bottom of the Leak Gopher Z-Wave Valve Control marked “3.6 VDC”. Plug the wall cube into a 110 VAC outlet. This provides power to the Leak Gopher Z-Wave Valve Control.\n- Configure the Z-Wave Controller to Remove a device. \n- When the Z-Wave Controller is ready to Remove a device, it will display a message like “waiting to remove device. Press remove button on the device”\n- The Add/Remove button is located on the side of the Leak Gopher Z-Wave Valve Control. Press the Add/Remove button. \n- The Z-Wave Controller will acknowledge that the Leak Gopher Z-Wave Valve Control had been removed from the Z-Wave network.\n- Your Leak Gopher Z-Wave Valve Control is removed form this controller.",
|
|
"reset": "How to reset the Leak Gopher Z-Wave Valve Control.\n- To reset the Leak Gopher Z-Wave Valve Control Z-Wave radio and routing table, press and hold the Add/Remove button located on the side of the Leak Gopher Z-Wave Valve Control for 15 seconds.",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/953/Leak%20Gopher%20Z-Wave%20Plus%20Instructions.pdf"
|
|
}
|
|
}
|