zwave-js/.config-db/devices/0x0159/zmnhad.json

{
	"manufacturer": "Qubino",
	"manufacturerId": "0x0159",
	"label": "ZMNHAD",
	"description": "Flush 1 Relay",
	"devices": [
		{
			"productType": "0x0002",
			"productId": "0x0052"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Input 1 Switch Type",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Mono-Stable switch type (Push button)",
					"value": 0
				},
				{
					"label": "Bi-Stable switch type",
					"value": 1
				}
			]
		},
		{
			"#": "2",
			"label": "Input 2 Contact Type",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "NO (Normally open) input type",
					"value": 0
				},
				{
					"label": "NC (Normally close) input type",
					"value": 1
				}
			]
		},
		{
			"#": "3",
			"label": "Input 3 Contact Type",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "NO (Normally open) input type",
					"value": 0
				},
				{
					"label": "NC (Normally close) input type",
					"value": 1
				}
			]
		},
		{
			"#": "10",
			"label": "Activate /Deactivate ALL ON/ALL OFF",
			"description": "module responds to commands ALL ON / ALL OFF",
			"valueSize": 1,
			"defaultValue": 255,
			"unsigned": true,
			"allowManualEntry": false,
			"options": [
				{
					"label": "All on is not active all off is not active",
					"value": 0
				},
				{
					"label": "All on is not active all off active",
					"value": 1
				},
				{
					"label": "All on active all off is not active",
					"value": 2
				},
				{
					"label": "All on active, all off active",
					"value": 255
				}
			]
		},
		{
			"#": "11",
			"label": "Automatic Turning Off Relay After Set Time",
			"description": "When relay goes automatically OFF after this time",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32535,
			"defaultValue": 0
		},
		{
			"#": "12",
			"label": "Automatic Turning on Relay After Set Time",
			"description": "When relay goes automatically ON after this time",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32535,
			"defaultValue": 0
		},
		{
			"#": "15",
			"label": "Automatic Switching Units Selection",
			"description": "NOTE: Parameter is the same for turning OFF or ON.",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Seconds selected",
					"value": 0
				},
				{
					"label": "Milliseconds selected",
					"value": 1
				}
			]
		},
		{
			"#": "30",
			"$import": "~/templates/master_template.json#state_after_power_failure_prev_off"
		},
		{
			"#": "40",
			"label": "Power Reporting in Watts on Power Change",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 100,
			"defaultValue": 10
		},
		{
			"#": "42",
			"label": "Power Reporting in Watts by Time Interval",
			"description": "Set value means time interval when power report is send",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32535,
			"defaultValue": 300
		},
		{
			"#": "63",
			"label": "Output Switch Selection",
			"description": "Set the type of the device connected to the output. (NO) / (NC)",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "0V (NC)",
					"value": 0
				},
				{
					"label": "230V or 240V (NO)",
					"value": 1
				}
			]
		},
		{
			"#": "100",
			"label": "Endpoints I2 Notification Type and Event",
			"description": "After changing this parameter, the device MUST be excluded and then re-included after waiting 30 seconds.",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Endpoint, I2 disabled",
					"value": 0
				},
				{
					"label": "Home security",
					"value": 1
				},
				{
					"label": "Carbon monoxide",
					"value": 2
				},
				{
					"label": "Carbon dioxide",
					"value": 3
				},
				{
					"label": "Water alarm",
					"value": 4
				},
				{
					"label": "Heat alarm",
					"value": 5
				},
				{
					"label": "Smoke alarm",
					"value": 6
				},
				{
					"label": "Binary Sensor",
					"value": 9
				}
			]
		},
		{
			"#": "101",
			"label": "Endpoints I3 Notification Type and Event",
			"description": "After changing this parameter, the device MUST be excluded and then re-included after waiting 30 seconds.",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Endpoint, I3 disabled",
					"value": 0
				},
				{
					"label": "Home security",
					"value": 1
				},
				{
					"label": "Carbon monoxide",
					"value": 2
				},
				{
					"label": "Carbon dioxide",
					"value": 3
				},
				{
					"label": "Water alarm",
					"value": 4
				},
				{
					"label": "Heat alarm",
					"value": 5
				},
				{
					"label": "Smoke alarm",
					"value": 6
				},
				{
					"label": "Binary Sensor",
					"value": 9
				}
			]
		},
		{
			"#": "110",
			"label": "Temperature Sensor Offset Settings",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 32536,
			"unsigned": true
		},
		{
			"#": "120",
			"label": "Digital Temperature Sensor Reporting",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 127,
			"defaultValue": 5
		}
	],
	"compat": {
		// The device has user-configurable endpoints. We shouldn't hide them
		"preserveEndpoints": "*"
	}
}