65 lines
2.4 KiB
JSON
65 lines
2.4 KiB
JSON
{
|
|
"manufacturer": "Zipato",
|
|
"manufacturerId": "0x0131",
|
|
"label": "NE-NAS-DS01Z",
|
|
"description": "Door Sensor",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0003",
|
|
"productId": "0x0082",
|
|
"zwaveAllianceId": 2723
|
|
},
|
|
{
|
|
"productType": "0x0033",
|
|
"productId": "0x1082",
|
|
"zwaveAllianceId": 2717
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"paramInformation": [
|
|
{
|
|
"#": "1",
|
|
"label": "Off Delay",
|
|
"valueSize": 2,
|
|
"unit": "seconds",
|
|
"minValue": 0,
|
|
"maxValue": 65535,
|
|
"defaultValue": 0,
|
|
"unsigned": true,
|
|
"options": [
|
|
{
|
|
"label": "Disabled",
|
|
"value": 0
|
|
}
|
|
]
|
|
},
|
|
{
|
|
"#": "2",
|
|
"label": "Basic Set Level",
|
|
"valueSize": 1,
|
|
"minValue": 0,
|
|
"maxValue": 255,
|
|
"defaultValue": 255,
|
|
"unsigned": true,
|
|
"options": [
|
|
{
|
|
"label": "Off",
|
|
"value": 0
|
|
},
|
|
{
|
|
"label": "Return to previous non-zero value",
|
|
"value": 255
|
|
}
|
|
]
|
|
}
|
|
],
|
|
"metadata": {
|
|
"inclusion": "Add the Sensor (Door/Window detector) to Z-Wave Network\n\n1.Remove the sensor cover. \n\n2.Make sure the sensor is powered. \n\n3.Set Z-Wave controller or Z-Wave gateway into inclusion mode (Refer to the controller or gateway operating manual) \n4.Press the button three times within 1.5 second, the device will enter inclusion mode. And the LED will flash on and off alternately five times.",
|
|
"exclusion": "Delete the Sensor (Door/Window detector) from Z-Wave Network\n\n1.Remove the device cover. \n\n2.Make sure the sensor is powered. \n\n3.Set Z-Wave controller or Z-Wave gateway into exclusion mode (Refer to the controller or gateway operating manual) \n4.Press the button three times within 1.5 second, the device will enter exclusion mode.",
|
|
"reset": "Note: to use the reset procedure only when the primary controller is missing or inoperable.\n\nRestore the Sensor (Door/Window detector) to Factory Default Settings\n\nReset procedure will delete all information on the Z-Wave network and Z-Wave controller or Z-Wave Gateway, and restore the sensor to factory default settings.\n1.Remove the device cover. \n\n2.Make sure the sensor is powered. \n\n3.Press and hold the button for 10 seconds, \n\n4.Release the button.",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2717/ne-nas-ds01z%20-%20Zipato%20Door%20Sensor%20User%20Manual%201.1.pdf"
|
|
}
|
|
}
|