23 lines
1.4 KiB
JSON
23 lines
1.4 KiB
JSON
{
|
|
"manufacturer": "Vision Security",
|
|
"manufacturerId": "0x0109",
|
|
"label": "ZW4111EU-5",
|
|
"description": "Curtain Module",
|
|
"devices": [
|
|
{
|
|
"productType": "0x2018",
|
|
"productId": "0x1805",
|
|
"zwaveAllianceId": 1582
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"metadata": {
|
|
"inclusion": "3. For “Inclusion” in (adding to) a network: Put the Z-Wave™ Interface Controller into“inclusion” mode, and following its instruction to add the ZW4111 to your controller. To get in the “inclusion” mode, press the program switch 3 times or outer switch 1 / switch 2 to be included. \nNOTE: The red LED will flash if ZW4111 has not been included before or the red LED will be OFF.",
|
|
"exclusion": "For “Exclusion” from (removing from) a network: Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the ZW 4101 / ZW4111 from your controller. Press the program switch or outer switch 1 / switch 2 3 times to be excluded",
|
|
"reset": "Press Program Switch and power on till 5 seconds, ZW4111 will send the “Device Reset Locally Notification” command and reset to the factory default. (Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.)",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1582/ZW%204111-5%20Curtain%20(Screw%20Terminal)%2020151124.pdf"
|
|
}
|
|
}
|