30 lines
1.6 KiB
JSON
30 lines
1.6 KiB
JSON
{
|
|
"manufacturer": "Vision Security",
|
|
"manufacturerId": "0x0109",
|
|
"label": "ZL7201DE-5",
|
|
"description": "Plug-In On/Off Module",
|
|
"devices": [
|
|
{
|
|
"productType": "0x2007",
|
|
"productId": "0x0706",
|
|
"zwaveAllianceId": 1083
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"associations": {
|
|
"1": {
|
|
"label": "Group 1",
|
|
"maxNodes": 5,
|
|
"isLifeline": true
|
|
}
|
|
},
|
|
"metadata": {
|
|
"inclusion": "For “Inclusion” in (adding to) a network: Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZL7201 into your controller. To get in the “Inclusion” mode, the distance between ZL7201 and controller is suggested to be in one meter. By power up to get included for first time, or press the Program switch (The LED at the top of plug-in) 3 times within 2 seconds to be included",
|
|
"exclusion": "For “Exclusion” from (removing from) a network: Set up the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the ZL7201 from your controller. Press the Program Switch (The LED at the top of plug-in) 3 times within 2 seconds to be excluded",
|
|
"reset": "Reset: Press the Program Switch (The LED at the top of plug-in) then power on (plug-in) and hold for 5 seconds before release the switch.\n\nNoticed: only use Reset for the situation where the primary controller is inoperable or lost",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1083/ZL%207261-5_%20Power%20Monitor_20140814.pdf"
|
|
}
|
|
}
|