29 lines
2.1 KiB
JSON
29 lines
2.1 KiB
JSON
{
|
|
"manufacturer": "Leviton",
|
|
"manufacturerId": "0x001d",
|
|
"label": "ZW15R",
|
|
"description": "Receptacle",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0037",
|
|
"productId": "0x0002",
|
|
"zwaveAllianceId": 3829
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"paramInformation": [
|
|
{
|
|
"#": "7",
|
|
"$import": "templates/leviton_template.json#locator_led"
|
|
}
|
|
],
|
|
"metadata": {
|
|
"inclusion": "Classic Inclusion To A Z-Wave Network\nFor older controllers Classic Inclusion is supported. Depending on the age of the controller the controller will need to be 3 to 35 feet from the device when including.\n1. To enter programming mode, hold the button for 7 seconds. The status light will turn amber, release and the status light will blink.\n2. Follow the Z-Wave controller instructions to enter inclusion mode.\n3. Tap the top of the button one time. The status light will quickly flash green.\n4. The Z-Wave controller will confirm successful exclusion from the network",
|
|
"exclusion": "Exclusion From A Z-Wave Network\nWhen removing an outlet from a Z-Wave network, best practice is to use the exclusion command found in the Z-Wave controller.\n1. To enter programming mode, hold the button for 7 seconds. The status light will turn amber, release and the status light will blink.\n2. Follow Z-Wave controller directions to enter exclusion mode\n3. Tap the button 1 time. The status light will quickly flash green.\n4. The Z-Wave controller will remove the device from the network",
|
|
"reset": "Factory Default\nWhen removing an outlet from a network it is best practice to use the exclusion process. In situations where a device needs to be returned to factory default follow the following steps. A reset should only be used when a controller is inoperable or missing.\n1. Hold the button for 7 seconds, the status light will turn amber. Continue holding the button for another 7 seconds (total of 14 seconds). The status light will quickly flash red/amber.\n2. Release the button and the device will reset",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3829/Draft%20ZW15R%203-25-20.pdf"
|
|
}
|
|
}
|