23 lines
1.5 KiB
JSON
23 lines
1.5 KiB
JSON
{
|
||
"manufacturer": "Shenzhen Saykey Technology Co., Ltd.",
|
||
"manufacturerId": "0x032c",
|
||
"label": "SK-3003-06",
|
||
"description": "Door/Window Detect Sensor",
|
||
"devices": [
|
||
{
|
||
"productType": "0x3003",
|
||
"productId": "0x0006",
|
||
"zwaveAllianceId": 2663
|
||
}
|
||
],
|
||
"firmwareVersion": {
|
||
"min": "0.0",
|
||
"max": "255.255"
|
||
},
|
||
"metadata": {
|
||
"inclusion": "1) Remove the battery plastic separator or make sure battery level is normally, and Make sure the product is located within direct range of the Z-Wave controller.\n2) Set the main controller into the inclusion/Add device mode (refer to main controller’s operating manual).\n3) Click the Add/Remove button on the bottom side of product triple times in 1.5 seconds.\n4) The product will be detected and included in the Z-Wave network",
|
||
"exclusion": "1) Make sure battery level is normally and the product is located within direct range of the Z-Wave controller.\n2) Set the main controller into the exclusion/Remove device mode (refer to main controller’s operating manual).\n3) Click the Add/Remove button on the bottom side of product triple times in 1.5 seconds.\n4) The product will be detected and excluded from the Z-Wave network",
|
||
"reset": "The factory default settings are restored when the device is removed from the network.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
|
||
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2663/Wireless_Door_Sensor_User_Manual_20171117.pdf"
|
||
}
|
||
}
|