23 lines
1.6 KiB
JSON
23 lines
1.6 KiB
JSON
{
|
|
"manufacturer": "Climax Technology, Ltd.",
|
|
"manufacturerId": "0x018e",
|
|
"label": "PSM-DIN3-ZW",
|
|
"description": "DIN Rail Power Switch Meter",
|
|
"devices": [
|
|
{
|
|
"productType": "0x0004",
|
|
"productId": "0x0013",
|
|
"zwaveAllianceId": 3864
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"metadata": {
|
|
"inclusion": "1. Connect the external power supply to the input connector and external devices to the output connector.\n2. Put the Z-Wave Gateway or Control Panel into Inclusion mode (please refer to the Z-Wave Gateway or Control Panel manual).\n3. Within 1.5 seconds, press the Function Button 3 times.\n4. Refer to the operation manual of the Z-Wave Gateway or Control panel to complete the adding process.\n5. If the device has already been added (included) into another Z-Wave Gateway/Control Panel, or if the device is unable to be added into the current Z-Wave Gateway/Control Panel, please exclude it first (see Removing Device) before attempting to include it into the current Z-Wave Gateway/Control Panel.",
|
|
"exclusion": "1. Put the Z-Wave gateway or control panel into Exclusion mode (please refer to the Z-Wave gateway or control panel manual).\n2. Within 1.5 seconds, press the Function Button 3 times and the device will be removed from the Z-Wave network.",
|
|
"reset": "(Only use factory reset when network Control Panel/Gateway is missing or inoperable).\n*. Press and hold the Function Button of the device for 10 seconds to factory reset",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3864/PSM-DIN3-ZW-S2_SmartStart_20200423.pdf"
|
|
}
|
|
}
|