zwave-js/.config-db/devices/0x013c/psr03-b.json
2025-01-10 22:05:04 -08:00

131 lines
3.8 KiB
JSON

{
"manufacturer": "Philio Technology Corp",
"manufacturerId": "0x013c",
"label": "PSR03-B",
"description": "Scene Remote",
"devices": [
{
"productType": "0x0008",
"productId": "0x001d",
"zwaveAllianceId": 1176
}
],
"firmwareVersion": {
"min": "0.0",
"max": "255.255"
},
"associations": {
"1": {
"label": "Lifeline",
"maxNodes": 4,
"isLifeline": true
},
"2": {
"label": "Lighting Group 1 (Top Left)",
"maxNodes": 4
},
"3": {
"label": "Lighting Group 2 (Top Right)",
"maxNodes": 4
},
"4": {
"label": "Lighting Group 3 (Bottom Left)",
"maxNodes": 4
},
"5": {
"label": "Lighting Group 4 (Bottom Right)",
"maxNodes": 4
},
"6": {
"label": "Lighting Group 5 (Top Left)",
"maxNodes": 4
},
"7": {
"label": "Lighting Group 6 (Top Right)",
"maxNodes": 4
},
"8": {
"label": "Lighting Group 7 (Bottom Left)",
"maxNodes": 4
},
"9": {
"label": "Lighting Group 8 (Bottom Right)",
"maxNodes": 4
}
},
"paramInformation": [
{
"#": "2",
"$import": "templates/philio_template.json#basic_set_value"
},
{
"#": "7[0x01]",
"$import": "~/templates/master_template.json#base_enable_disable",
"label": "Button Function",
"options": [
{
"label": "AV control",
"value": 0
},
{
"label": "Lighting group control",
"value": 1
}
]
},
{
"#": "10",
"$import": "templates/philio_template.json#battery_report_interval_30m"
},
{
"#": "82",
"$import": "templates/philio_template.json#association_basic_set_value",
"label": "Lighting Group 1: Basic Set Value"
},
{
"#": "83",
"$import": "templates/philio_template.json#association_basic_set_value",
"label": "Lighting Group 2: Basic Set Value"
},
{
"#": "84",
"$import": "templates/philio_template.json#association_basic_set_value",
"label": "Lighting Group 3: Basic Set Value"
},
{
"#": "85",
"$import": "templates/philio_template.json#association_basic_set_value",
"label": "Lighting Group 4: Basic Set Value"
},
{
"#": "86",
"$import": "templates/philio_template.json#association_basic_set_value",
"label": "Lighting Group 5: Basic Set Value"
},
{
"#": "87",
"$import": "templates/philio_template.json#association_basic_set_value",
"label": "Lighting Group 6: Basic Set Value"
},
{
"#": "88",
"$import": "templates/philio_template.json#association_basic_set_value",
"label": "Lighting Group 7: Basic Set Value"
},
{
"#": "89",
"$import": "templates/philio_template.json#association_basic_set_value",
"label": "Lighting Group 8: Basic Set Value"
}
],
"metadata": {
"inclusion": "1. Have Z-Wave™ Controller entered add mode.\n2. Press the key three times within 1.5 seconds to enter the add mode.\n3. After add successful, the device will wake to receive the setting command from Z-Wave ™ Controller about 20 seconds",
"exclusion": "1. Have Z-Wave ™ Controller entered remove mode.\n2. Press the key three times within 1.5 seconds to enter the \nremove mode.\nNode ID has been excluded",
"reset": "Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable.\n1. Press the key three times,and do not release the key in the 4 th pressed, and the LED will light ON.\n2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the keys. If successful, the LED will light ON one second. Otherwise, the LED will flash once.\n3. IDs are remove and all settings will reset to factory \ndefault",
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1407/PSR03_ABC_version_Manual.pdf"
},
"compat": {
// The device uses Basic Set to indicate pressed buttons in Lighting Control Mode
"mapBasicSet": "event"
}
}