23 lines
1.4 KiB
JSON
23 lines
1.4 KiB
JSON
{
|
|
"manufacturer": "Vision Security",
|
|
"manufacturerId": "0x0109",
|
|
"label": "ZS5101US-5",
|
|
"description": "Wireless Shock Sensor",
|
|
"devices": [
|
|
{
|
|
"productType": "0x2003",
|
|
"productId": "0x0308",
|
|
"zwaveAllianceId": 2099
|
|
}
|
|
],
|
|
"firmwareVersion": {
|
|
"min": "0.0",
|
|
"max": "255.255"
|
|
},
|
|
"metadata": {
|
|
"inclusion": "Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZS 5101-5 to your controller. To get in the “inclusion” mode, please press the program switch of ZS 5101-5 for 1 second at least to be included. The LED on the ZS 5101-5 should go off, if not, please try again",
|
|
"exclusion": "Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the ZS 5101-5 from your controller. Press the program switch of ZS 5101-5 for 1 second at least to be excluded.",
|
|
"reset": "*Push the Tamper switch then power on (put in the battery) & hold the Tamper switch for 5 seconds, ZD5101-5 will send the “Device Reset Locally Notification” command and reset to the factory default, LED will solid on, need to take off the battery and re-put in the battery to complete the function.\n*Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable.",
|
|
"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2099/ZS%205101-5_V1_20160427.pdf"
|
|
}
|
|
}
|