{
	"manufacturer": "Resideo",
	"manufacturerId": "0x041b",
	"label": "39456 / ZW1002",
	"description": "In-Wall Outlet, Tamper Resistant, 500S",
	"devices": [
		{
			"productType": "0x4952",
			"productId": "0x3133",
			"zwaveAllianceId": 3836
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Single Press",
			"maxNodes": 5
		},
		"3": {
			"label": "Double Tap",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "3",
			"label": "LED Light",
			"description": "LED status when device on or off.",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED on when load is off",
					"value": 0
				},
				{
					"label": "LED on when light is turned on",
					"value": 1
				},
				{
					"label": "LED always off",
					"value": 2
				}
			]
		}
	],
	"compat": {
		"mapBasicSet": "event"
	},
	"metadata": {
		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a\ndevice to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the\nprogram button. Repeat as necessary to add the smart outlet to\nthe network.\nYou have complete control",
		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a\ndevice from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the\nmanual/program button",
		"reset": "Quickly press the button three times. Then, press the button for at least three\nseconds. The LED will blink five times to confirm.\nNote: This should only be used in the event your network’s primary controller\nis missing or otherwise inoperable"
	}
}