{
	"manufacturer": "Resideo",
	"manufacturerId": "0x041b",
	"label": "39449 / ZW4106",
	"description": "Plug-In 2-Outlet Switch, Simultaneous, 500S",
	"devices": [
		{
			"productType": "0x5052",
			"productId": "0x3033",
			"zwaveAllianceId": 3827
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Single Press",
			"maxNodes": 5
		},
		"3": {
			"label": "Double Tap",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "3",
			"label": "LED Light",
			"description": "LED status when device on or off.",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "LED on when load is off",
					"value": 0
				},
				{
					"label": "LED on when light is turned on",
					"value": 1
				},
				{
					"label": "LED always off",
					"value": 2
				}
			]
		}
	],
	"compat": {
		"mapBasicSet": "event"
	},
	"metadata": {
		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press\nand release the manual/program button on the smart\nswitch. Repeat as necessary to add the switch to\nthe network",
		"exclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press\nand release the manual/program button on the smart\nswitch to remove it from the network",
		"reset": "1. If plugged in, unplug the device from the receptacle.\n2. Press and hold the top button, plug the device in and\ncontinue to hold for at least 3 seconds.\nNOTE: This should only be used in the event your network’s\nprimary controller is missing or otherwise inoperable"
	}
}