{
	"manufacturer": "Aeotec Ltd.",
	"manufacturerId": "0x0371",
	"label": "ZWA011",
	"description": "Door/Window Sensor 7",
	"devices": [
		{
			"productType": "0x0002",
			"productId": "0x000b"
		},
		{
			"productType": "0x0102",
			"productId": "0x000b"
		},
		{
			"productType": "0x0202",
			"productId": "0x000b"
		},
		{
			"productType": "0x0002",
			"productId": "0x0029"
		},
		{
			"productType": "0x0102",
			"productId": "0x0029"
		},
		{
			"productType": "0x0202",
			"productId": "0x0029"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "Control",
			"maxNodes": 5
		},
		"3": {
			"label": "Alarm sensor",
			"maxNodes": 5
		},
		"4": {
			"label": "Tamper",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "3",
			"$import": "~/0x0086/templates/aeotec_template.json#invert_state_report",
			"label": "State When Magnet Is Close to Sensor",
			"options": [
				{
					"label": "Report closed when magnet is near",
					"value": 0
				},
				{
					"label": "Report opened when magnet is near",
					"value": 1
				}
			]
		},
		{
			"#": "4[0x01]",
			"$import": "~/0x0086/templates/aeotec_template.json#led_indicator_open"
		},
		{
			"#": "4[0x02]",
			"$import": "~/0x0086/templates/aeotec_template.json#led_indicator_wake"
		},
		{
			"#": "4[0x04]",
			"$import": "~/0x0086/templates/aeotec_template.json#led_indicator_tamper",
			"defaultValue": 1
		},
		{
			"#": "5",
			"$import": "~/0x0086/templates/aeotec_template.json#range_test_double_click"
		},
		{
			"#": "6",
			"$import": "~/0x0086/templates/aeotec_template.json#association_group_2_trigger"
		},
		{
			"#": "7",
			"$import": "~/0x0086/templates/aeotec_template.json#association_group_2_command_type"
		},
		{
			"#": "8",
			"$import": "~/0x0086/templates/aeotec_template.json#association_group_2_basic_set_on"
		},
		{
			"#": "9",
			"$import": "~/0x0086/templates/aeotec_template.json#association_group_2_basic_set_off",
			"defaultValue": 0
		},
		{
			"#": "10",
			"$import": "~/0x0086/templates/aeotec_template.json#time_delay_on",
			"defaultValue": 0
		},
		{
			"#": "11",
			"$import": "~/0x0086/templates/aeotec_template.json#time_delay_off",
			"defaultValue": 0
		},
		{
			"#": "12",
			"$import": "~/0x0086/templates/aeotec_template.json#time_delay_tamper",
			"defaultValue": 0
		},
		{
			"#": "13",
			"$import": "~/0x0086/templates/aeotec_template.json#report_on_tamper_cancel"
		},
		{
			"#": "255",
			"$import": "~/0x0086/templates/aeotec_template.json#factory_reset_exclude"
		}
	],
	"metadata": {
		"inclusion": "Triple clicking the tamper button includes (adds) the device",
		"exclusion": "Triple clicking the tamper button excludes (removes) the device",
		"reset": "This device also allows to be reset without any involvement of a Z-Wave controller. This procedure should only be used when the primary controller is inoperable.\nOnce Cover is removed and tamper switch is tripped, push the tamper for 5 seconds until red LED blinks. Then release tamper and push it again for 5 seconds until LED blinks",
		"manual": "https://aeotec.freshdesk.com/support/solutions/articles/6000230382-door-window-sensor-7-basic-user-guide-zwa011-"
	}
}