{
	"manufacturer": "Vesternet",
	"manufacturerId": "0x0330",
	"label": "VES-ZW-SWI-014",
	"description": "2 Channel Switch",
	"devices": [
		{
			"productType": "0x0004",
			"productId": "0xd109"
		}
	],
	"firmwareVersion": {
		"min": "1.2.5",
		"max": "1.3.6"
	},
	"paramInformation": [
		{
			"#": "2",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Send Binary Report on State Change",
			"defaultValue": 1
		},
		{
			"#": "4",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
		},
		{
			"#": "5",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Over Current Protection",
			"description": "Triggered when module goes over current limit.",
			"defaultValue": 1
		},
		{
			"#": "7",
			"label": "Momentary Switch Input Behaviour",
			"description": "Only valid in Light Mode",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "All the same, toggle the respective output",
					"value": 0
				},
				{
					"label": "Short press only, toggle the respective output",
					"value": 1
				},
				{
					"label": "Hold & release only, toggle the respective output",
					"value": 2
				},
				{
					"label": "Short press only, toggle both outputs",
					"value": 3
				},
				{
					"label": "Hold & release only, toggle both outputs",
					"value": 4
				}
			]
		},
		{
			"#": "8",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Inclusion / Exclusion Using External Switch On Input S1",
			"defaultValue": 1
		},
		{
			"#": "9",
			"label": "Send Central Scene Commands in Response to Inputs",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disabled for both inputs",
					"value": 0
				},
				{
					"label": "Enabled for both inputs",
					"value": 1
				},
				{
					"label": "Enable for S1 input only",
					"value": 2
				},
				{
					"label": "Enable for S2 input only",
					"value": 3
				}
			]
		},
		{
			"#": "10",
			"label": "Power Change Report Threshold",
			"valueSize": 1,
			"unit": "W",
			"minValue": 0,
			"maxValue": 100,
			"defaultValue": 10,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "11",
			"label": "Current Change Report Threshold",
			"valueSize": 1,
			"unit": "0.1 A",
			"minValue": 0,
			"maxValue": 10,
			"defaultValue": 1,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "12",
			"label": "Voltage Change Report Threshold",
			"valueSize": 1,
			"unit": "V",
			"minValue": 0,
			"maxValue": 10,
			"defaultValue": 2,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "14",
			"label": "Energy/Power/Voltage/Current Report Interval",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 3600,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		}
	],
	"metadata": {
		"inclusion": "Step 1. Set primary controller/gateway into inclusion mode.\nStep 2. Either power cycle the product, or triple press the action button.\n Step 3. The connected light will stay on solid for 3 seconds to indicate successful inclusion.",
		"exclusion": "Step 1. Set primary controller/gateway into exclusion mode.\nStep 2. Triple press the action button.",
		"reset": "Press and hold the action button for over 10 seconds.",
		"manual": "https://cdn.shopify.com/s/files/1/0066/8149/3559/files/VES-ZW-SWI-014.pdf"
	}
}