{
	"manufacturer": "EVA Logik",
	"manufacturerId": "0x0312",
	"label": "ZW31S",
	"description": "S2 Smart Start Dimmer Switch",
	"devices": [
		{
			"productType": "0xbb00",
			"productId": "0xbb02",
			"zwaveAllianceId": 4078
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"$import": "~/templates/master_template.json#orientation_momentary"
		},
		{
			"#": "2",
			"$import": "~/templates/master_template.json#led_indicator_four_options"
		},
		{
			"#": "3",
			"$import": "templates/minoston_template.json#auto_off_timer"
		},
		{
			"#": "5",
			"$import": "templates/minoston_template.json#auto_on_timer"
		},
		{
			"#": "8",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
		},
		{
			"#": "9",
			"$import": "~/templates/master_template.json#dimming_speed_1-99_seconds",
			"label": "Dimming Speed (Local & Z-Wave)"
		},
		{
			"#": "16",
			"$import": "~/templates/master_template.json#dimming_speed_1-99_seconds",
			"label": "Dimming Speed (Press & Hold)"
		},
		{
			"#": "10",
			"$import": "~/templates/master_template.json#minimum_dim_level_0-99"
		},
		{
			"#": "11",
			"$import": "~/templates/master_template.json#maximum_dim_level_0-99",
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "12",
			"$import": "templates/minoston_template.json#double_tap_function"
		},
		{
			"#": "15",
			"$import": "~/templates/master_template.json#smart_switch_mode_0-2"
		},
		{
			"#": "21",
			"$import": "templates/minoston_template.json#report_state_when_local_control_disabled"
		},
		{
			"#": "18",
			"$import": "~/templates/master_template.json#default_dim_level_0-99"
		},
		{
			"#": "19",
			"$import": "templates/minoston_template.json#external_switch_type_four_options"
		},
		{
			"#": "20",
			"$import": "templates/minoston_template.json#association_reports_basic_multilevel"
		},
		{
			"#": "22",
			"$import": "templates/minoston_template.json#night_mode_brightness"
		},
		{
			"#": "23",
			"$import": "templates/minoston_template.json#led_indicator_color"
		},
		{
			"#": "24",
			"$import": "templates/minoston_template.json#led_indicator_brightness"
		},
		{
			"#": "25",
			"$import": "templates/minoston_template.json#single_tap_function"
		}
	],
	"metadata": {
		"inclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the Up or Down button three times in one second",
		"exclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the Up or Down button three times in one second",
		"reset": "Press and hold lower paddle for 10 seconds, then LED starts blinking, release paddle and within 2 seconds, click lower paddle 5 times\n(Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable.)",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4078/ZW31Smanual-20210107-2.pdf"
	}
}