{
	"manufacturer": "Minoston",
	"manufacturerId": "0x0312",
	"label": "MP22ZD",
	"description": "Z-Wave Outdoor Smart Plug",
	"devices": [
		{
			"productType": "0xff07",
			"productId": "0xff03",
			"zwaveAllianceId": 4254
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 1,
			"isLifeline": true
		},
		"2": {
			"label": "Basic Set",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "2",
			"$import": "~/templates/master_template.json#led_indicator_four_options"
		},
		{
			"#": "4",
			"$import": "templates/minoston_template.json#auto_off_timer"
		},
		{
			"#": "6",
			"$import": "templates/minoston_template.json#auto_on_timer"
		},
		{
			"#": "7",
			"label": "Night Mode Brightness Level",
			"description": "Hold button for two seconds to enter night mode.",
			"valueSize": 1,
			"unit": "10%",
			"minValue": 1,
			"maxValue": 10,
			"defaultValue": 2
		},
		{
			"#": "8",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
		},
		{
			"#": "9",
			"$import": "~/templates/master_template.json#dim_rate",
			"label": "Dimming Rate (Manual On/Off)"
		},
		{
			"#": "10",
			"$import": "~/templates/master_template.json#dim_rate",
			"label": "Dimming Rate (Manual Dimming / Z-Wave)"
		},
		{
			"#": "11",
			"$import": "~/templates/master_template.json#minimum_dim_level_0-99",
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "12",
			"$import": "~/templates/master_template.json#maximum_dim_level_0-99",
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		}
	],
	"metadata": {
		"inclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
		"exclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
		"reset": "Press click Z-Wave button 3 times quickly, and hold for at least 10 seconds at the third time to restore the device to the factory\n(Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable.)",
		"manual": "https://minoston.com/wp-content/uploads/2021/08/MP22ZD-%E8%AF%B4%E6%98%8E%E4%B9%A6.pdf"
	}
}