{
	"manufacturer": "Minoston",
	"manufacturerId": "0x0312",
	"label": "MP21ZP / MP31ZP",
	"description": "Mini Plug with Power Meter",
	"devices": [
		{
			"productType": "0xff00",
			"productId": "0xff0e",
			"zwaveAllianceId": 4247
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"$import": "templates/minoston_template.json#led_indicator_four_options_inverted"
		},
		{
			"#": "9",
			"$if": "firmwareVersion >= 1.10.1",
			"$import": "templates/minoston_template.json#led_indicator_brightness"
		},
		{
			"#": "2",
			"$import": "templates/minoston_template.json#auto_off_timer"
		},
		{
			"#": "3",
			"$import": "templates/minoston_template.json#auto_on_timer"
		},
		{
			"#": "4",
			"$import": "~/templates/master_template.json#state_after_power_failure_prev_off_on"
		},
		{
			"#": "10",
			"$if": "firmwareVersion >= 1.11.1",
			"$import": "templates/minoston_template.json#power_reporting"
		},
		{
			"#": "5",
			"$import": "templates/minoston_template.json#power_reporting_threshold"
		},
		{
			"#": "6",
			"$import": "templates/minoston_template.json#power_reporting_interval"
		},
		{
			"#": "11",
			"$if": "firmwareVersion >= 1.11.1",
			"$import": "templates/minoston_template.json#current_reporting"
		},
		{
			"#": "7",
			"$import": "templates/minoston_template.json#current_reporting_threshold"
		},
		{
			"#": "12",
			"$if": "firmwareVersion >= 1.11.1",
			"$import": "templates/minoston_template.json#current_reporting_interval"
		},
		{
			"#": "8",
			"$import": "templates/minoston_template.json#energy_reporting_threshold"
		},
		{
			"#": "13",
			"$if": "firmwareVersion >= 1.11.1",
			"$import": "templates/minoston_template.json#voltage_reporting_interval"
		}
	],
	"metadata": {
		"inclusion": "ADD or Remove the MP21ZP from the existing Z-Wave home control network with your primary controller.\n---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n---When prompted by your primary controller, click the PROG button Three times in one second.\nInclude MP21ZP to/from a Z-Wave Gateway with supporting Security.The MP21ZP can support the Primary Controller that implemented the\nNotice: Including a node ID allocated by Z-WaveTM Controller means “Add” or “Inclusion”. Excluding a node ID allocated by\nZ-WaveTM Controller means “Remove” or “Exclusion”",
		"exclusion": "ADD or Remove the MP21ZP from the existing Z-Wave home control network with your primary controller.\n---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n---When prompted by your primary controller, click the PROG button Three times in one second.\nInclude MP21ZP to/from a Z-Wave Gateway with supporting Security.The MP21ZP can support the Primary Controller that implemented the\nNotice: Including a node ID allocated by Z-WaveTM Controller means “Add” or “Inclusion”. Excluding a node ID allocated by\nZ-WaveTM Controller means “Remove” or “Exclusion”",
		"reset": "Press the button twice quickly and then press and hold the button 10S.device will reset\n(Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable)",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4247/MP21ZP-manual-20210722.pdf"
	}
}