// This is an older version of the MP21Z, certified in 2019
{
	"manufacturer": "Minoston",
	"manufacturerId": "0x0312",
	"label": "MP21Z",
	"description": "Smart Plug - 1 Channel",
	"devices": [
		{
			"productType": "0xff00",
			"productId": "0xff06",
			"zwaveAllianceId": 3715
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "1",
			"$import": "~/templates/master_template.json#led_indicator_three_options"
		},
		{
			"#": "2",
			"$import": "templates/minoston_template.json#auto_off_timer_36000s"
		}
	],
	"metadata": {
		"inclusion": "ADD the MP21Z from the existing Z-Wave home control network with your primary controller.\n ---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n ---When prompted by your primary controller, click the Up or Down button three times in one second.\nInclude MP21Z to/from a Z-Wave Gateway with supporting Security.The MP21Z can support the Primary Controller that implemented the security S2",
		"exclusion": "Remove the MP21Z from the existing Z-Wave home control network with your primary controller.\n ---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n ---When prompted by your primary controller, click the Up or Down button three times in one second.\nInclude MP21Z to/from a Z-Wave Gateway with supporting Security.The MP21Z can support the Primary Controller that implemented the security S2",
		"reset": "MANUAL RESET\n ---Power off MP21Z\n ---keep holding the PROG button\n ---Power on,Press and keep holding the PROG button for no less than 10 seconds.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable.\"",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3715/MP21Z-Manual171102.pdf"
	}
}