// The firmware versions on this device are a mess
// 16.9 / 17.9: HW version 1.0, 500 series
// 24.16 / 32.2 / 32.12: HW version 2.0, 500 series
// 32.32 / 1.10+: HW version 3.0, 700 series, called ZSE40 700

// Conditionals:
// version 1.0: firmwareVersion >= 16.9 && firmwareVersion < 24.16
// version 2.0: firmwareVersion >= 24.16 && firmwareVersion < 32.32
// version 3.0: firmwareVersion >= 32.32 || firmwareVersion >= 1.10 && firmwareVersion < 16.9

{
	"manufacturer": "Zooz",
	"manufacturerId": "0x027a",
	"label": [
		{
			"$if": "firmwareVersion >= 32.32 || firmwareVersion >= 1.10 && firmwareVersion < 16.9",
			"value": "ZSE40 700"
		},
		// Fallback for non-700 series
		"ZSE40"
	],
	"description": "4-in-1 Sensor",
	"devices": [
		{
			"productType": "0x2021",
			"productId": "0x2101",
			"zwaveAllianceId": 4307
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 3,
			"isLifeline": true
		},
		"2": {
			"$if": "firmwareVersion >= 32.2 || firmwareVersion >= 1.10 && firmwareVersion < 16.9",
			"label": "Group 2",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit"
		},
		{
			"#": "2",
			"label": "Temperature Reporting Threshold",
			"valueSize": 1,
			"unit": "0.1 °",
			"minValue": 0,
			"maxValue": 50,
			"defaultValue": 10
		},
		{
			"#": "3",
			"label": "Humidity Reporting Threshold",
			"valueSize": 1,
			"unit": "%",
			"minValue": 1,
			"maxValue": 50,
			"defaultValue": 10
		},
		{
			"#": "4",
			"label": "Brightness Reporting Threshold",
			"valueSize": 1,
			"unit": "%",
			"minValue": 1,
			"maxValue": 50,
			"defaultValue": 10
		},
		{
			"#": "5",
			// Initial release of HW version 1.0
			"$if": "firmwareVersion >= 16.9 && firmwareVersion < 17.9",
			"$import": "~/templates/master_template.json#base_1-255_nounit",
			"label": "Re-Trigger Interval",
			"unit": "minutes",
			"defaultValue": 3
		},
		{
			"#": "5",
			// Update 17.9 changed the unit to seconds
			"$if": "firmwareVersion >= 17.9 && firmwareVersion < 24.16",
			"label": "Re-Trigger Interval",
			"valueSize": 1,
			"unit": "seconds",
			"minValue": 15,
			"maxValue": 60,
			"defaultValue": 15
		},
		{
			"#": "5",
			// Update 24.16 changed the range to 15-255, this also applies to HW version 1.0
			"label": "Re-Trigger Interval",
			"valueSize": 1,
			"unit": "seconds",
			"minValue": 15,
			"maxValue": 255,
			"defaultValue": 15,
			"unsigned": true
		},
		{
			"#": "6",
			// HW version 1.0, first release has default value 3
			"$if": "firmwareVersion >= 16.9 && firmwareVersion < 17.9",
			"label": "Motion Sensor Sensitivity",
			"description": "Adjust sensitivity of the motion sensor.",
			"valueSize": 1,
			"defaultValue": 3,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Highest",
					"value": 1
				},
				{
					"label": "Higher",
					"value": 2
				},
				{
					"label": "High",
					"value": 3
				},
				{
					"label": "Normal",
					"value": 4
				},
				{
					"label": "Low",
					"value": 5
				},
				{
					"label": "Lower",
					"value": 6
				},
				{
					"label": "Lowest",
					"value": 7
				}
			]
		},
		{
			"#": "6",
			// All other releases have default value 4
			"$if": "firmwareVersion < 16.9 || firmwareVersion >= 17.9",
			"label": "Motion Sensor Sensitivity",
			"description": "Adjust sensitivity of the motion sensor.",
			"valueSize": 1,
			"defaultValue": 4,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Highest",
					"value": 1
				},
				{
					"label": "Higher",
					"value": 2
				},
				{
					"label": "High",
					"value": 3
				},
				{
					"label": "Normal",
					"value": 4
				},
				{
					"label": "Low",
					"value": 5
				},
				{
					"label": "Lower",
					"value": 6
				},
				{
					"label": "Lowest",
					"value": 7
				}
			]
		},
		{
			"#": "7",
			// Hardware version 3 has removed mode 4
			"$if": "firmwareVersion >= 32.32 || firmwareVersion >= 1.10 && firmwareVersion < 16.9",
			"label": "LED Indicator Mode",
			"valueSize": 1,
			"defaultValue": 3,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Off",
					"value": 1
				},
				{
					"label": "Flashing with temperature and motion",
					"value": 2
				},
				{
					"label": "Flashing with motion",
					"value": 3
				}
			]
		},
		{
			"#": "7",
			// All other versions still have mode 4
			"label": "LED Indicator Mode",
			"valueSize": 1,
			"defaultValue": 4,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Off",
					"value": 1
				},
				{
					"label": "Pulsing temperature, flashing motion",
					"value": 2
				},
				{
					"label": "Flashing temperature and motion",
					"value": 3
				},
				{
					"label": "No temperature, flashing motion",
					"value": 4
				}
			]
		},
		{
			"#": "8",
			// Added in firmware version 32.2, still present in HW 3.0
			"$if": "firmwareVersion >= 32.2 || firmwareVersion >= 1.10 && firmwareVersion < 16.9",
			"$import": "~/templates/master_template.json#base_enable_disable_255",
			"label": "Basic Set Reports",
			"defaultValue": 1
		},
		{
			"#": "9",
			// Added with the switch to the new firmware versioning scheme
			"$if": "firmwareVersion >= 1.10 && firmwareVersion < 16.9",
			"label": "Temperature Offset",
			"description": "Set the reporting offset on your temperature sensor. 0=-10, 100=0, 200=+10",
			"valueSize": 1,
			"unit": "0.1 °F/C",
			"minValue": 0,
			"maxValue": 200,
			"defaultValue": 100,
			"unsigned": true
		},
		{
			"#": "10",
			// Added with the switch to the new firmware versioning scheme
			"$if": "firmwareVersion >= 1.10 && firmwareVersion < 16.9",
			"label": "Humidity Offset",
			"description": "Set the reporting offset on your humidity sensor. 0=-10%, 100=0%, 200=+10%",
			"valueSize": 1,
			"unit": "0.1 %",
			"minValue": 0,
			"maxValue": 200,
			"defaultValue": 100,
			"unsigned": true
		}
	],
	"metadata": {
		"inclusion": "Initiate inclusion (pairing) in the app (or web interface).\nClick the Z-Wave button with a paperclip twice. The LED indicator will start flashing",
		"exclusion": "Initiate exclusion in the app (or web interface).\nClick the Z-Wave button with a paperclip twice. The LED indicator will start flashing",
		"reset": "If your primary controller is missing or\ninoperable, you may need to reset the\ndevice to factory settings. To complete\nthe reset process manually, remove the\nback cover to trigger tamper switch.\nPress and release the Z-Wave button\nusing a paperclip 10 TIMES quickly\n(within 10 seconds)",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4307/zooz-zse40-700-manual-online.pdf"
	}
}