{
	"manufacturer": "Zooz",
	"manufacturerId": "0x027a",
	"label": "ZEN26",
	"description": "Z-Wave Plus S2 ON/OFF Switch",
	"devices": [
		{
			"productType": "0xa000",
			"productId": "0xa001"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 1,
			"isLifeline": true
		},
		"2": {
			"label": "On/Off Control",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"$if": "firmwareVersion <= 2.2",
			"$import": "~/templates/master_template.json#orientation"
		},
		{
			"#": "1",
			"$if": "firmwareVersion >= 2.3",
			"$import": "~/templates/master_template.json#orientation_momentary"
		},
		{
			"#": "2",
			"$import": "~/templates/master_template.json#led_indicator_four_options"
		},
		{
			"#": "3",
			"$if": "firmwareVersion <= 1.255",
			"label": "Auto Turn-Off Timer Duration",
			"description": "Set the number of seconds to automatically turn off switch once it has been turned on (0 to disable).",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 60
		},
		{
			"#": "3",
			"$if": "firmwareVersion >= 2.0",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Auto Turn-Off Timer"
		},
		{
			"#": "4",
			"$if": "firmwareVersion >= 2.0",
			"$import": "templates/zooz_template.json#auto_off_timer_duration"
		},
		{
			"#": "5",
			"$if": "firmwareVersion >= 2.0",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Auto Turn-On Timer"
		},
		{
			"#": "6",
			"$if": "firmwareVersion >= 2.0",
			"$import": "templates/zooz_template.json#auto_on_timer_duration"
		},
		{
			"#": "7[0x01]",
			"$if": "firmwareVersion >= 2.0",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Control Group 2 with Physical Switch",
			"defaultValue": 1
		},
		{
			"#": "7[0x02]",
			"$if": "firmwareVersion >= 2.0",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Control Group 2 with Connected 3-Way Switch",
			"defaultValue": 1
		},
		{
			"#": "7[0x04]",
			"$if": "firmwareVersion >= 2.0",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Control Group 2 with Z-Wave Commands",
			"defaultValue": 1
		},
		{
			"#": "7[0x08]",
			"$if": "firmwareVersion >= 2.0",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Control Group 2 with On/Off Timers",
			"defaultValue": 1
		},
		{
			"#": "8",
			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
		},
		{
			"#": "10",
			"$if": "firmwareVersion >= 2.0",
			"$import": "templates/zooz_template.json#enable_scene_control"
		},
		{
			"#": "11",
			"$if": "firmwareVersion >= 2.0",
			"$import": "~/templates/master_template.json#smart_switch_mode_0-2"
		},
		{
			"#": "13",
			"$if": "firmwareVersion >= 2.2",
			"$import": "templates/zooz_template.json#smart_switch_mode_reporting"
		}
	],
	"metadata": {
		"inclusion": "1. Initiate inclusion mode on the Z-Wave hub.\n2. Tap the upper paddle of the switch 3 times quickly. The LED indicators will blink to signal communication and remain on for 2 seconds to confirm inclusion",
		"exclusion": "1. Initiate exclusion mode on the Z-Wave hub.\n2. Tap the lower paddle on the switch 3 times quickly\n3. Your hub will confirm exclusion and the device will disappear from your controller's device list",
		"reset": "1. Tap-tap-tap’n’hold the upper paddle for at least 10 seconds. The LED indicator will flash to confirm successful reset.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3147/zooz-z-wave-plus-s2-on-off-switch-zen26-manual.pdf"
	}
}