{
	"manufacturer": "Zooz",
	"manufacturerId": "0x027a",
	"label": "ZEN06",
	"description": "Smart Plug with 2 USB Ports",
	"devices": [
		{
			"productType": "0x0101",
			"productId": "0x000a"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 1,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "20",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Overload Protection",
			"description": "turns relay off once voltage exceeds 16.5A for over 5 secs if enabled",
			"defaultValue": 1
		},
		{
			"#": "21",
			"$import": "~/templates/master_template.json#state_after_power_failure_prev_on_off"
		},
		{
			"#": "24",
			"label": "On/Off Status Change Notifications",
			"description": "Send notifications to associated devices",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disabled",
					"value": 0
				},
				{
					"label": "Send any change",
					"value": 1
				},
				{
					"label": "Send manual changes",
					"value": 2
				}
			]
		},
		{
			"#": "27",
			"label": "LED Indicator Control",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Display power consumption always",
					"value": 0
				},
				{
					"label": "Display power consumption at state change",
					"value": 1
				}
			]
		},
		{
			"#": "151",
			"label": "Power Report Value Threshold",
			"description": "Minimum change in Watt to report",
			"valueSize": 2,
			"unit": "W",
			"minValue": 0,
			"maxValue": 65535,
			"defaultValue": 50,
			"unsigned": true
		},
		{
			"#": "152",
			"$import": "~/templates/master_template.json#base_0-255_nounit",
			"label": "Power Report Percentage Threshold",
			"unit": "%",
			"defaultValue": 10
		},
		{
			"#": "171",
			"label": "Power (W) Report Frequency",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 30
		},
		{
			"#": "172",
			"label": "Energy (kWh) Report Frequency",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 300
		},
		{
			"#": "173",
			"label": "Voltage Report Frequency",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 0
		},
		{
			"#": "174",
			"label": "Current (A) Report Frequency",
			"valueSize": 4,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 2678400,
			"defaultValue": 0
		}
	],
	"metadata": {
		"inclusion": "There are three types of inclusion for this device: 1) Auto Z-Wave Inclusion 2) Manual Z-Wave Inclusion 3) Secure Z-Wave Inclusion.\n\n1) Auto Z-Wave Inclusion\n1. Put your Z-Wave controller in inclusion mode\n2. Plug the smart plug into a grounded receptacle located within 3 feet from your Z-Wave gateway controller\n3. LED indicator will flash blue4. A new on / off device should be recognized by your Z-Wave controller\n\n2)Manual Z-Wave Inclusion\n1. Plug the smart plug into a grounded receptacle located within 3 feet from your Z-Wave gateway controller\n2. Put your Z-Wave controller in inclusion mode\n3. Press and release the Z-Wave button 3 TIMES QUICKLY\n4. LED indicator will flash blue\n5. A new on / off device should be recognized by your Z-Wave controller\n\n3)Secure Z-Wave Inclusion\n1. Plug the smart plug into a grounded receptacle located within 3 feet from your Z-Wave gateway controller\n2. Put your Z-Wave controller in secure inclusion mode\n3. Press and HOLD the Z-Wave button for at least 3 seconds\n4. LED indicator will flash green\n5. LED indicator will turn solid green once the inclusion is completed. Please allow 5 minutes for configuration. DO NOT press any buttons or move the device during that time\n6. A new secure on / off device should be recognized by your Z-Wave controller.",
		"exclusion": "1. Plug the smart plug into a grounded receptacle located within 3 feet from your Z-Wave gateway controller\n2. Put your Z-Wave controller in exclusion mode\n3. Press and release the Z-Wave button 3 TIMES QUICKLY\n4. LED indicator will flash orange\n5. The smart plug should disappear from your controller's device list and LED indicator will remain solid orange for a few seconds to indicate exclusion.",
		"reset": "Plug the smart plug into a grounded receptacle, then PRESS AND HOLD the Z-Wave button for AT LEAST 20 SECONDS. The LED indicator will stay solid yellow for 2 seconds to indicate successful reset. The plug will then automatically turn off. NOTE: All previously recorded activity and custom settings will be erased from the devices memory. You may only reset your smart plug once it has been included to a Z-Wave network.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=Manuals/1901/Zooz-Z-Wave-Smart-Plug-ZEN06%20Manual.pdf"
	}
}