{
	"motion_light_duration": {
		"label": "Light Duration After Motion",
		"valueSize": 2,
		"unit": "seconds",
		"minValue": 5,
		"maxValue": 900,
		"defaultValue": 180
	},
	"light_threshold": {
		"label": "Light Threshold",
		"description": "Allowable range: 0, 2-2000. Moving the potentiometer overwrites the current setting.",
		"valueSize": 2,
		"unit": "lux",
		"minValue": 0,
		"maxValue": 2000,
		"defaultValue": 2000,
		"options": [
			{
				"label": "Execute learn sequence",
				"value": 0
			},
			{
				"label": "Disable threshold (always night)",
				"value": 2000
			}
		]
	},
	"night_dim_mode": {
		"label": "Night Dim Mode Duration",
		"description": "Allowable range: 0-60, 255. External control overrides this setting.",
		"valueSize": 1,
		"unit": "minutes",
		"minValue": 0,
		"maxValue": 255,
		"defaultValue": 0,
		"unsigned": true,
		"options": [
			{
				"label": "Disable, light off completely",
				"value": 0
			},
			{
				"label": "Whole night",
				"value": 255
			}
		]
	},
	"motion_sensor_range": {
		"label": "Motion Sensor Range",
		"description": "Moving the potentiometer overwrites the current setting.",
		"unit": "cm",
		"valueSize": 2,
		"minValue": 100,
		"maxValue": 500,
		"defaultValue": 500
	},
	"motion_sensor_sensitivity": {
		"label": "Motion Sensor Sensitivity",
		"description": "Moving the potentiometer overwrites the current setting.",
		"valueSize": 1,
		"unit": "%",
		"minValue": 2,
		"maxValue": 100,
		"defaultValue": 100
	},
	"brightness_measuring_interval": {
		"label": "Brightness Measuring Interval",
		"description": "Lamp switches off briefly and measures the ambient light. Allowable range: 5-120.",
		"valueSize": 1,
		"unit": "minutes",
		"minValue": 0,
		"maxValue": 120,
		"defaultValue": 0,
		"options": [
			{
				"label": "Disable",
				"value": 0
			}
		]
	},
	"external_light_sensor": {
		"$import": "~/templates/master_template.json#base_enable_disable",
		"label": "External Ambient Light Sensor",
		"description": "Measurements from associated Z-Wave light sensors are preferred if not older than 30 minutes.",
		"defaultValue": 1
	},
	"light_behavior": {
		// Meant to be used with the bitmask 0x07
		"label": "Light Behavior",
		"valueSize": 1,
		"minValue": 0,
		"maxValue": 4,
		"defaultValue": 2,
		"unsigned": true,
		"allowManualEntry": false,
		"options": [
			{
				"label": "Normal mode",
				"value": 0
			},
			{
				"label": "External control",
				"value": 1
			},
			{
				"label": "Normal mode + gateway check",
				"value": 2
			},
			{
				"label": "External control + gateway check",
				"value": 3
			},
			{
				"label": "Permanently on",
				"value": 4
			}
		]
	},
	"off_command_duration": {
		"label": "Z-Wave Off Command: Turn Off Duration",
		"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
		"valueSize": 2,
		"minValue": 0,
		"maxValue": 255,
		"defaultValue": 10,
		"options": [
			{
				"label": "Turn off immediately, until motion detected",
				"value": 0
			},
			{
				"label": "Turn off immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
				"value": 255
			}
		]
	},
	"on_command_duration": {
		"label": "Z-Wave On Command: Turn On Duration",
		"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
		"valueSize": 2,
		"minValue": 0,
		"maxValue": 255,
		"defaultValue": 255,
		"options": [
			{
				"label": "Turn on, wait for motion immediately",
				"value": 0
			},
			{
				"label": "Turn on immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
				"value": 255
			}
		]
	},
	"motion_wait_limit": {
		"label": "Z-Wave On / Off-On: Motion Wait Time Limit",
		"description": "How long to wait for motion after the configured duration before returning to normal operation to prevent staying on forever: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
		"valueSize": 2,
		"minValue": 0,
		"maxValue": 255,
		"defaultValue": 204,
		"options": [
			{
				"label": "Do not wait for motion",
				"value": 0
			},
			{
				"label": "Wait for motion indefinitely",
				"value": 255
			}
		]
	},
	"on_off_sequence_off_duration": {
		"label": "Z-Wave On-Off Sequence: Turn Off Duration",
		"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
		"valueSize": 2,
		"minValue": 0,
		"maxValue": 255,
		"defaultValue": 204,
		"options": [
			{
				"label": "Immediately, until motion detected",
				"value": 0
			},
			{
				"label": "Ignore sequence, treat like off command",
				"value": 255
			}
		]
	},
	"off_on_sequence_on_duration": {
		"label": "Z-Wave Off-On Sequence: Turn On Duration",
		"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
		"valueSize": 2,
		"minValue": 0,
		"maxValue": 255,
		"defaultValue": 204,
		"options": [
			{
				"label": "Turn on, wait for motion immediately",
				"value": 0
			},
			{
				"label": "Ignore sequence, treat like on command",
				"value": 255
			}
		]
	},
	"sequence_timing": {
		"label": "Sequence Timing",
		"description": "Maximum delay between on-off or off-on commands to treat as a sequence",
		"valueSize": 1,
		"unit": "0.1 s",
		"minValue": 10,
		"maxValue": 50,
		"defaultValue": 10
	},
	"command_motion_disable_timeout": {
		"label": "Motion Sensor Disable Timeout",
		"description": "How long to disable internal motion sensor after Basic Set command to motion endpoint: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
		"valueSize": 2,
		"minValue": 0,
		"maxValue": 255,
		"defaultValue": 0,
		"options": [
			{
				"label": "Ignore command, sensor permanently enabled",
				"value": 0
			},
			{
				"label": "Ignore command, sensor permanently disabled",
				"value": 255
			}
		]
	}
}