{
	"manufacturer": "Strattec Advanced Logic, LLC",
	"manufacturerId": "0x0217",
	"label": "8002",
	"description": "Westinghouse RTS-Z-AU",
	"devices": [
		{
			"productType": "0x0800",
			"productId": "0x0002",
			"zwaveAllianceId": 2170
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": "To include our device into a controller.\n1. Perform 'Include' on the controller.\n2. From the lock's main menu item \"7.Z-Wave\", select the \"Z-WaveInclusion\" option by using the arrow keys to scroll to it and then pressing 'M' to select it. After a few seconds, you should see \" Success\" on the lock",
		"exclusion": "To exclude our device into a controller.\n1. Perform 'Exclude' on the controller.\n2. From the lock's main menu item \"7.Z-Wave\", select the \"Z-WaveExclusion\" option by using the arrow keys to scroll to it and then pressing 'M' to select it. After a few seconds, you should see \" Success\" on the lock",
		"reset": "If your controller fails or is replaced or if you need to perform a Factory reset on the device so that an inclusion may be performed again or with a new controller. Factory reset can be done on the device by selecting 'Hard Reset' from the Main Menu on device's display and pressing the M button. When prompted to reset is complete the display with return to the Main Menu.\nNote: When a Hard Reset is completed, the Z-Wave node id is initialized to 0 and the device can't be controlled by Z-Wave. In order to control the device again, the controller needs to include the device on Z-Wave network.Please use this procedure only when the network primary controller is missing or otherwise inoperable",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2170/RTS_Manual_rev110216_Final.pdf"
	}
}