{
	"manufacturer": "Climax Technology, Ltd.",
	"manufacturerId": "0x018e",
	"label": "LM-1ZW",
	"description": "Luminance Meter",
	"devices": [
		{
			"productType": "0x0004",
			"productId": "0x0017",
			"zwaveAllianceId": 2485
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"metadata": {
		"inclusion": " Put the Z-Wave gateway or control panel into Inclusion mode (please refer to the Z-Wave gateway or control panel manual).\n Within 1.5 seconds, press the Function Button 3 times.\n Refer to the operation manual of the Z-Wave gateway or control panel to complete the adding process.\n If the Sensor has already been added (included) into another Z-Wave Gateway/Control Panel, or if the device is unable to be added into the current Z-Wave Gateway/Control Panel, try removing it first (see Removing Device).",
		"exclusion": " Put the Z-Wave gateway or control panel into Exclusion mode (please refer to the Z-Wave gateway or control panel manual).\n Within 1.5 seconds, press the Function Button 3 times and the Sensor will be removed from the Z-Wave network, the LED will light on for 1 second to indicate.",
		"reset": "(Only use factory reset when network Control Panel/Gateway is missing or inoperable)\n Remove the battery of the Sensor first.\n Press and hold the Function Button. While holding the Function Button, power on the Sensor by re-inserting the battery, wait for 10 seconds to factory reset, the LED will light on for 1 second to indicate.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2485/LM-1ZW_20170608.pdf"
	}
}