{
	"manufacturer": "Ness Corporation Pty Ltd.",
	"manufacturerId": "0x0189",
	"label": "117001",
	"description": "Z-Wave LUX PIR Sensor",
	"devices": [
		{
			"productType": "0x0104",
			"productId": "0x0301",
			"zwaveAllianceId": 4249
		},
		{
			"productType": "0x0204",
			"productId": "0x0301",
			"zwaveAllianceId": 4158
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"label": "Motion Retrigger Timeout",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 10,
			"maxValue": 3600,
			"defaultValue": 240,
			"options": [
				{
					"label": "Disable",
					"value": 10
				}
			]
		},
		{
			"#": "2",
			"label": "Motion Retrigger Timeout Reset Mode",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 1,
			"defaultValue": 0,
			"options": [
				{
					"label": "Restart timeout with each motion event",
					"value": 0
				},
				{
					"label": "Calculate timeout from initial motion event",
					"value": 1
				}
			]
		},
		{
			"#": "3",
			"label": "Motion Reset Timeout",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 3600,
			"defaultValue": 10,
			"options": [
				{
					"label": "Disable motion clear report",
					"value": 0
				}
			]
		},
		{
			"#": "4",
			"label": "Low Battery Threshold",
			"valueSize": 1,
			"unit": "%",
			"minValue": 10,
			"maxValue": 50,
			"defaultValue": 10
		},
		{
			"#": "5",
			"label": "Battery Reporting Interval",
			"valueSize": 1,
			"unit": "minutes",
			"minValue": 0,
			"maxValue": 120,
			"defaultValue": 12,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "6",
			"label": "Luminance Change Threshold",
			"valueSize": 1,
			"unit": "lux",
			"minValue": 0,
			"maxValue": 60,
			"defaultValue": 50,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "7",
			"label": "Temperature Change Threshold",
			"valueSize": 1,
			"unit": "0.1 °C/°F",
			"minValue": 0,
			"maxValue": 80,
			"defaultValue": 10
		},
		{
			"#": "8",
			"label": "Temperature Reporting Interval",
			"valueSize": 1,
			"unit": "30 minutes",
			"minValue": 0,
			"maxValue": 120,
			"defaultValue": 6,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "9",
			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit"
		},
		{
			"#": "10",
			"label": "Night Light Duration",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "10 seconds",
					"value": 0
				},
				{
					"label": "30 seconds",
					"value": 1
				}
			]
		},
		{
			"#": "11",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Night Light with Low Ambient Light",
			"description": "If enabled, the night light will function despite a low ambient light level"
		},
		{
			"#": "12",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Tamper Alarm Reporting"
		},
		{
			"#": "13",
			"label": "Walk Test Mode Duration",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Disable",
					"value": 0
				},
				{
					"label": "10 minutes",
					"value": 1
				},
				{
					"label": "30 minutes",
					"value": 2
				},
				{
					"label": "60 minutes",
					"value": 3
				}
			]
		}
	],
	"metadata": {
		"inclusion": "Power up the LUX Z-Wave sensor by inserting the batteries (or fit the batteries in the correct polarity).\nYou may need to refer to your Z-Wave controller’s instructions for adding devices.\n1. Put your primary Z-Wave gateway into inclusion mode, the gateway should confirm that it is waiting to add a new device,\n2. Press the Z-Wave Action button on your LUX Z-Wave sensor for 1 second.\n3. The LED on the LUX Z-Wave sensor will blink Red rapidly, followed by a solid Green LED for 1 second for successful inclusion, or a solid red LED for 1 second for a failed inclusion",
		"exclusion": "1. Put your primary Z-Wave gateway into exclude mode, the gateway should confirm that it is waiting to remove a device,\n2. Press the Z-Wave Action button on your LUX Z-Wave sensor for 1 second.\n3. The LED on the LUX Z-Wave sensor will display a solid Green LED for 1 second after successful exclusion",
		"reset": "To reset all LUX Z-Wave sensor settings to factory default, press and hold the Z-Wave Action button for 20 seconds and release. This will remove any previous Z- Wave network inclusion credentials and reset any user set parameters.",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4158/890-493_LUX_ZWave_Manual_Rev1.0_Draft9.pdf"
	}
}