{
	"manufacturer": "Qubino",
	"manufacturerId": "0x0159",
	"label": "ZMNHCD",
	"description": "Flush Shutter",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0052"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"paramInformation": [
		{
			"#": "10",
			"label": "ALL ON/ALL OFF",
			"description": "Responds to commands ALL ON / ALL OFF from Main Controller",
			"valueSize": 2,
			"defaultValue": 255,
			"allowManualEntry": false,
			"options": [
				{
					"label": "All on is not active all off is not active",
					"value": 0
				},
				{
					"label": "All on is not active all off active",
					"value": 1
				},
				{
					"label": "All on is not active all off is not active",
					"value": 2
				},
				{
					"label": "All on active, all off active",
					"value": 255
				}
			]
		},
		{
			"#": "40",
			"label": "Power Reporting in Watts on Power Change",
			"description": "Power consumption change threshold for sending updates",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 100,
			"defaultValue": 1
		},
		{
			"#": "42",
			"label": "Power Reporting in Watts by Time Interval",
			"valueSize": 2,
			"unit": "seconds",
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 300
		},
		{
			"#": "71",
			"label": "Operating Modes",
			"description": "Operation Mode (Shutter or Venetian)",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Shutter mode",
					"value": 0
				},
				{
					"label": "Venetian mode (Up/Down and slate rotation)",
					"value": 1
				}
			]
		},
		{
			"#": "72",
			"label": "Slats Tilting Full Turn Time",
			"description": "Slat full turn time in tenths of a second.",
			"valueSize": 2,
			"unit": "0.1 seconds",
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 150
		},
		{
			"#": "73",
			"label": "Slats Position",
			"description": "Slats position after up/down movement.",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Ret. To previous position for Z-Wave control only",
					"value": 0
				},
				{
					"label": "Return to previous position in all cases",
					"value": 1
				}
			]
		},
		{
			"#": "74",
			"label": "Motor Moving Up/down Time",
			"description": "Shutter motor moving time of complete opening or complete closing",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 0
		},
		{
			"#": "76",
			"label": "Motor Operation Detection",
			"description": "Power threshold to be interpreted when motor reach the limit switch",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 127,
			"defaultValue": 10
		},
		{
			"#": "78",
			"label": "Forced Shutter Calibration",
			"description": "Enters calibration mode if set to 1",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Default",
					"value": 0
				},
				{
					"label": "Start calibration process",
					"value": 1
				}
			]
		},
		{
			"#": "80",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Reporting to Controller",
			"description": "Defines if reporting regarding power level, etc is reported to controller.",
			"defaultValue": 1
		},
		{
			"#": "85",
			"label": "Power Consumption Max Delay Time",
			"description": "Time delay for detecting motor errors",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 50,
			"defaultValue": 8
		},
		{
			"#": "86",
			"$if": "firmwareVersion >= 4.1",
			"label": "Power Consumption At Limit Switch Delay Time",
			"description": "Sets the time delay for detecting limit switches",
			"valueSize": 1,
			"minValue": 3,
			"maxValue": 50,
			"defaultValue": 8
		},
		{
			"#": "90",
			"label": "Relay Delay Time",
			"description": "Defines the minimum time delay between next motor movement",
			"valueSize": 1,
			"unit": "ms",
			"minValue": 1,
			"maxValue": 30,
			"defaultValue": 5
		},
		{
			"#": "110",
			"label": "Temperature Sensor Offset Settings",
			"description": "Adds or removes an offset from the measured temperature.",
			"valueSize": 2,
			"minValue": 1,
			"maxValue": 32536,
			"defaultValue": 32536
		},
		{
			"#": "120",
			"label": "Digital Temperature Sensor Reporting",
			"description": "Threshold for sending temperature change reports",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 127,
			"defaultValue": 5
		}
	]
}