{
	"manufacturer": "Qubino",
	"manufacturerId": "0x0159",
	"label": "ZMNHCA",
	"description": "Flush Shutter",
	"devices": [
		{
			"productType": "0x0003",
			"productId": "0x0002"
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "basic on/off",
			"description": "triggered at change of the input I1 state and reflecting its state",
			"maxNodes": 16
		},
		"2": {
			"label": "basic on/of",
			"description": "triggered at change of the input I2 state and reflecting its state",
			"maxNodes": 16
		},
		"3": {
			"label": "multileve",
			"description": "triggered at changes of value of the Flush shutter position",
			"maxNodes": 16
		},
		"4": {
			"label": "multilevel",
			"description": "triggered at changes of value of slats tilting position",
			"maxNodes": 16
		},
		"5": {
			"label": "Lifeline",
			"maxNodes": 16,
			"isLifeline": true
		}
	},
	"paramInformation": [
		{
			"#": "10",
			"label": "ALL ON / ALL OFF",
			"description": "Responds to commands ALL ON / ALL OFF from Main Controller",
			"valueSize": 2,
			"defaultValue": 255,
			"allowManualEntry": false,
			"options": [
				{
					"label": "All on is not active all off is not active",
					"value": 0
				},
				{
					"label": "All on is not active all off active",
					"value": 1
				},
				{
					"label": "All on is inactive all off is inactive",
					"value": 2
				},
				{
					"label": "All on active, all off active",
					"value": 255
				}
			]
		},
		{
			"#": "40",
			"label": "Reporting in Watts on Power Change for Q1 or Q2",
			"description": "Power consumption change threshold for sending updates",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 100,
			"defaultValue": 1
		},
		{
			"#": "42",
			"label": "Reporting in Watts by Time Interval for Q1 or Q2",
			"valueSize": 2,
			"unit": "W",
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 300
		},
		{
			"#": "71",
			"label": "Operating Modes",
			"description": "Operation Mode (Shutter or Venetian)",
			"valueSize": 1,
			"defaultValue": 0,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Shutter mode",
					"value": 0
				},
				{
					"label": "Venetian mode (Up/Down and slate rotation)",
					"value": 1
				}
			]
		},
		{
			"#": "72",
			"label": "Slats Tilting Full Turn Time",
			"description": "Slat full turn time in tenths of a second.",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 150
		},
		{
			"#": "73",
			"label": "Slats Position",
			"valueSize": 1,
			"defaultValue": 2,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Previously set position only in case of UI control",
					"value": 0
				},
				{
					"label": "Position in case of UI control, push",
					"value": 1
				},
				{
					"label": "Position in case of UI control, push button",
					"value": 2
				}
			]
		},
		{
			"#": "74",
			"label": "Motor Moving Up/down Time",
			"description": "Shutter motor moving time of complete opening or complete closing",
			"valueSize": 2,
			"minValue": 0,
			"maxValue": 32767,
			"defaultValue": 0
		},
		{
			"#": "76",
			"label": "Motor Operation Detection",
			"description": "Power threshold",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 127,
			"defaultValue": 10
		},
		{
			"#": "78",
			"label": "Forced Shutter Calibration",
			"description": "0 to 1 a Shutter enters the calibration mode",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 1,
			"defaultValue": 0
		},
		{
			"#": "80",
			"$import": "~/templates/master_template.json#base_enable_disable",
			"label": "Reporting to Controller",
			"defaultValue": 1
		},
		{
			"#": "85",
			"label": "Power Consumption Max Delay Time",
			"description": "max time before motor power consumption is read",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 50,
			"defaultValue": 0
		},
		{
			"#": "90",
			"label": "Relay Delay Time",
			"description": "This parameter defines the time delay between output relay switching",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 30,
			"defaultValue": 5
		}
	]
}