{
	"manufacturer": "Vision Security",
	"manufacturerId": "0x0109",
	"label": "ZP3113-7",
	"description": "4 in 1 PIR Sensor",
	"devices": [
		{
			"productType": "0x2021",
			"productId": "0x2112",
			"zwaveAllianceId": [4099, 4314, 4315]
		}
	],
	"firmwareVersion": {
		"min": "0.0",
		"max": "255.255"
	},
	"associations": {
		"1": {
			"label": "Lifeline",
			"maxNodes": 5,
			"isLifeline": true
		},
		"2": {
			"label": "On/Off",
			"maxNodes": 5
		}
	},
	"paramInformation": [
		{
			"#": "1",
			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit"
		},
		{
			"#": "2",
			"label": "Temperature Reporting Threshold",
			"valueSize": 1,
			"unit": "0.1 °C",
			"minValue": 1,
			"maxValue": 50,
			"defaultValue": 30
		},
		{
			"#": "3",
			"label": "Humidity Reporting Threshold",
			"description": "Allowable range: 5%-50%",
			"valueSize": 1,
			"unit": "%",
			"minValue": 0,
			"maxValue": 50,
			"defaultValue": 20,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "4",
			"label": "Light Reporting Threshold",
			"description": "Allowable range: 5%-50%",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 50,
			"defaultValue": 25,
			"options": [
				{
					"label": "Disable",
					"value": 0
				}
			]
		},
		{
			"#": "5",
			"label": "Motion Trigger Interval",
			"valueSize": 1,
			"unit": "minutes",
			"minValue": 1,
			"maxValue": 127,
			"defaultValue": 3
		},
		{
			"#": "6",
			"label": "Motion Sensitivity",
			"valueSize": 1,
			"minValue": 1,
			"maxValue": 7,
			"defaultValue": 4
		},
		{
			"#": "7",
			"label": "LED Indicator",
			"valueSize": 1,
			"defaultValue": 1,
			"allowManualEntry": false,
			"options": [
				{
					"label": "Always off",
					"value": 1
				},
				{
					"label": "Flash - PIR/Temperature",
					"value": 2
				},
				{
					"label": "PIR only",
					"value": 3
				}
			]
		},
		{
			"#": "8",
			"label": "Message Failure Retry Limit",
			"valueSize": 1,
			"minValue": 0,
			"maxValue": 10,
			"defaultValue": 3
		}
	],
	"metadata": {
		"inclusion": "For “Inclusion” in (adding to) a network: To add the ZP3113 to your Z-Wave network (inclusion), place your Z-Wave primary controller into inclusion mode. Press the Program Switch of ZP3113 once for sending the NIF. After sending NIF, Z-Wave will send the auto inclusion, otherwise, ZP3113 will go to sleep after 30 seconds. The LED indicator will be flashing while the inclusion is continued",
		"exclusion": "For “Exclusion” from (removing from) a network: To remove the ZP3113 from your Z-Wave network (exclusion), place your Z-Wave primary controller into “exclusion” mode, and following its instruction to delete the ZP3113 to your controller. Press the Program Switch of ZP3113 once to be excluded.",
		"reset": "Factory Default Reset: \nRemove cover to triggered tamper switch, LED flash once & send out Alarm Report. Press Program Switch 10 times within 10 seconds, ZP3113 will send the “Device Reset Locally Notification” command and reset to the factory default. (Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.)",
		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4314/ZP3113-7%204%20in%201%20PIR%20(Z-Wave%20certified)%20-%2020211004.pdf"
	}
}